REMOVAL
Removal / installation · Vehicles built Aug 2012 – Jul 2013
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 Aug 2012 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014
- HINT:
- Use the same procedures for the RH side and LH side.
- The procedures described below are for the LH side.
| 1.
PRECAUTION |
 |
- CAUTION:
- Read "PRECAUTION" thoroughly before servicing (Click here).
| 2.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- CAUTION:
- Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
| 3.
REMOVE RADIATOR GRILLE
|
 |
- Using a clip remover, remove the 2 clips.
Remove the 2 screws.
Disengage the 5 clips and remove the radiator grille.
| 4.
REMOVE FRONT BUMPER COVER
|
 |
- Apply protective tape as shown in the illustration.
- Using a clip remover, remove the 5 clips.
- Remove the 8 screws and the 4 bolts.
- Disengage the 2 claws and remove the front bumper cover.
- Remove the 4 clips.
| 5.
REMOVE FRONT AIRBAG SENSOR LH |
 |
- Remove the 2 bolts.
Disengage the 2 claws and the front airbag sensor LH.
- Disconnect the connector from the front airbag sensor LH.