2011-2016 FJ Cruiser · Service Manual RESTRAINTS

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 Aug 2012 – Jul 2013 Aug 2013 – Jul 2014 from Aug 2014

HINT:
  1. Use the same procedures for the RH side and LH side.
  2. The procedures described below are for the LH side.


1. PRECAUTION

CAUTION:
Read "PRECAUTION" thoroughly before servicing (Click here).


2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.


3. REMOVE RADIATOR GRILLE

  1. B134729
    Using a clip remover, remove the 2 clips.

  1. Remove the 2 screws.

  1. Disengage the 5 clips and remove the radiator grille.


4. REMOVE FRONT BUMPER COVER

  1. B134730E02
    Apply protective tape as shown in the illustration.
    Text in Illustration 
    *a
    Protective Tape

  1. B138606
    Using a clip remover, remove the 5 clips.

  1. B134731
    Remove the 8 screws and 4 bolts.

  1. w/o Fog Light:

    1. B134733
      Disengage the 2 claws to remove the front bumper assembly.

  1. w/ Fog Light:

    1. Disengage the 2 claws and separate the front bumper assembly.

    2. Disconnect the connector to remove the front bumper assembly.

  1. B138601
    Remove the 4 clips.


5. REMOVE FRONT AIRBAG SENSOR LH

  1. C128245
    Remove the 2 bolts.

  1. Disengage the 2 claws and the front airbag sensor LH.

  1. C128261E01
    Disconnect the connector from the front airbag sensor LH.

← REMOVAL (Aug 2013 – Jul 2014)INSTALLATION (Jul 2007 – Oct 2010) →