REMOVAL
Removal / installation · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012
- HINT:
- Use the same procedures for the RH side and LH side.
- The procedures described below are for the LH side.
| 1.
PRECAUTION |
 |
- CAUTION:
- Read "PRECAUTION" thoroughly before servicing (Click here).
| 2.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
| 3.
REMOVE ROOF HEADLINING |
 |
- HINT:
- Refer to the procedures up to "REMOVE ROOF HEADLINING" (Click here).
| 4.
REMOVE ASSIST GRIP RETAINER LH |
 |
- Remove the 2 bolts and the assist grip retainer LH.
| 5.
REMOVE CURTAIN SHIELD AIRBAG ASSEMBLY LH |
 |
- Disconnect the connector from the curtain shield airbag assembly LH.
- NOTICE:
- When handling the airbag connector, take care not to damage the airbag wire harness.
Remove the clip.
Remove the 13 bolts and the curtain shield airbag assembly LH in the order shown in the illustration.

