2011-2016 FJ Cruiser · Service Manual COMMUNICATION SYSTEM

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Jul 2007


CHECK DTC
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch ON.

  3. Enter the following menus: DIAGNOSIS/OBD/MOBD/BODY/DTC INFO.

  4. Check the DTCs on the tester screen.

    HINT:
    Refer to the Techstream operator's manual for further details.


CLEAR DTC
  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch ON.

  3. Erase the DTCs by following the prompts on the tester screen.

  4. Enter the following menus: DIAGNOSIS/OBD/MOBD/BODY/DTC INFO.

    HINT:
    Refer to the Techstream operator's manual for further details.

← TERMINALS OF ECU (from Jul 2007)DIAGNOSTIC TROUBLE CODE CHART (from Jul 2007) →