2011-2016 FJ Cruiser · Service Manual ENGINE

ON-VEHICLE INSPECTION

Inspection · Vehicles built Jul 2007 – Jul 2009


INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
  1. Check the operation.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch ON.

    3. Turn the tester ON.

    4. Start the engine and warm it up.

    5. Select the following menu items: Powertrain / Engine and ECT / Active Test / Control the VVT System (Bank 1).

    6. Operate the OCV using the intelligent tester, then check the engine speed.

      Standard:
      Tester Operation
      Specified Condition
      OCV OFF
      Normal engine speed or idling
      OCV ON
      Rough idling or engine stalls

      If the operation is not as specified, check the camshaft timing oil control valve, wire harness and ECM.

← COMPONENTS (Jul 2007 – Jul 2009)REMOVAL (Jul 2007 – Jul 2009) →