2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


WIRELESS DOOR CONTROL SYSTEM DESCRIPTION
  1. This system locks and unlocks the vehicle's doors remotely. The wireless control system has the following features:

    1. The door control receiver performs the code identification procedure and the main body ECU operates the door lock control. A serial data link is provided for communication between the receiver and main body ECU.
    2. A key-integrated type transmitter is used and it contains the following 2 switches: the door lock switch, door unlock switch.


FUNCTION OF MAIN COMPONENTS
Component
Function
Door control transmitter
  1. Contains LOCK and UNLOCK switches.
  1. Transmits faint electric waves (recognition codes and function codes) to door control receiver.
Door control receiver
Receives weak electric waves (recognition codes and function codes) from door control transmitter, and changes waves to code data.
Door lock position switch
Transmits door lock conditions of each door to main body ECU.
Unlock warning switch assembly
Detects if key is in ignition key cylinder.
Front door courtesy switch assembly
Rear door courtesy switch assembly
Back door courtesy switch assembly
Back window courtesy switch assembly
Turns ON when door is open and turns OFF when door is closed. Outputs door status (open or closed) to main body ECU.
Main body ECU
Sends wireless door lock control signals in response to the code data from the door control receiver and signals from each switch.

SYSTEM FUNCTION
  1. Door lock/unlock function:

    1. With no key in the ignition key cylinder (unlock warning switch is OFF) and all door courtesy switches OFF, pressing the door control transmitter's LOCK/UNLOCK switch causes the transmitter to output faint electric waves. The transmitter sends the faint electrical wave to the door control receiver. The high frequency circuit built into the door control receiver demodulates the wave into code data, computes the data, and compares the data with previously registered ID codes. If the data is verified, a door lock/unlock request signal is output to the main body ECU. When the request signal is received, the main body ECU outputs a door lock/unlock control signal to each door lock assembly. Each door lock assembly then locks/unlocks its respective door and turns ON/OFF its door lock position switch in accordance with the signal.

  2. Answer-back function:

    1. The main body ECU receives the door unlock detection switch's ON/OFF signals and uses these signals to confirm if the door control operation has been completed. The main body ECU then outputs the hazard warning light control signals to flash the hazard warning lights and the wireless door lock buzzer control signals*1 to sound the wireless door lock buzzer*1 as an answer-back indication.
    1. *1: w/ Wireless door lock buzzer

  3. The wireless door lock control system has the following functions.

    Function
    Outline
    All door lock function
    Pressing LOCK switch locks all doors.
    All door unlock function
    Pressing UNLOCK switch unlocks all doors.
    Answer-back function
    Hazard warning lights flash once and wireless door lock buzzer sounds*1 once when doors are locked, and hazard warning lights flash twice and wireless door lock buzzer sounds*1 twice when doors are unlocked to indicate that operation has been completed.
    Automatic locking function
    If no doors are opened within 30 seconds of being unlocked by wireless transmitter, all doors are locked again automatically.
    Illuminated entry function
    If locked doors are unlocked through wireless operation, dome light illuminates. If one of following situations occurs, lights fade out:
    1. Within 15 seconds, doors are not opened and doors are locked through wireless operation.
    2. Within 15 seconds, key is inserted into ignition key cylinder and ignition switch is turned ON.
    3. No operations or actions are performed within 15 seconds.
    Security function
    Sends signal as rolling code.
    Transmitter recognition code registration function
    Enables 4 modes for registering (writing and storing) transmitter recognition codes in EEPROM, built into door control receiver.
    1. *1: w/ Wireless door lock buzzer

← SYSTEM DIAGRAM (from Aug 2014)SYSTEM DESCRIPTION (from Nov 2010) →