2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


WIRELESS DOOR CONTROL SYSTEM DESCRIPTION
  1. The wireless door lock control system functions to lock and unlock all the doors from a distance. The system is controlled by a door control transmitter which sends radio waves to the door control receiver. The main body ECU performs an ID code identification process and engages the door lock.


FUNCTION OF MAIN COMPONENTS
Component
Function
Door control transmitter
  1. Has LOCK, UNLOCK and PANIC*1 switches.
  1. Transmits weak radio waves (recognition codes and function codes) to the door control receiver.
  2. Illuminates the indicator light (LED) during transmission.
Door control receiver
Receives weak radio waves (recognition codes and function codes) and outputs them as code data to the main body ECU.
Door courtesy light switch
Turns on when a door is opened and turns off when it is closed. Outputs door status signals (open or closed) to the main body ECU.
Door unlock detection switch
Transmits the door lock positions of each door to the main body ECU.
Unlock warning switch assembly
Detects if the key is inserted in the ignition key cylinder or not.
Main body ECU
Sends wireless door lock control signals in response to the code data from the door control receiver and signals from each switch.
  1. *1 w/ Panic Alarm Function

SYSTEM FUNCTION
  1. The wireless door lock control system has the following functions.

    Function
    Outline
    All door lock
    Pressing lock switch locks all doors.
    All door unlock
    Pressing unlock switch unlocks all doors.
    Chattering prevention
    If a switch is pressed, the corresponding switch operation is performed once. If a switch is held down, the corresponding switch operation occurs only once and does not repeatedly activate. When pressing a switch at 1 second intervals, the corresponding operation activates once for every press of the switch.
    Answer-back
    1. When the doors are locked by wireless operation, the hazard warning lights flash once and the wireless door lock buzzer*1 sounds once.
    2. When the doors are unlocked by wireless operation, the hazard warning lights flash twice and the wireless door lock buzzer*1 sounds twice.
    Automatic lock
    If no doors are opened within 30 seconds after they are unlocked by the transmitter, all the doors will lock again automatically.
    Illuminated entry
    When all the doors are locked, pressing the UNLOCK button causes the interior lights and key illumination to illuminate simultaneously with the unlock operation.
    Door ajar warning*1
    If any door is open or ajar, pressing the lock switch causes the wireless door lock buzzer to sound for approximately 10 seconds.
    Panic alarm function*2
    Pressing the panic switch of the transmitter for more than approximately 0.8 seconds causes the system to perform the following operations:
    1. Sounds the horn.
    2. Flashes the hazard lights.
    While the panic alarm is operating, pressing any switch of the transmitter cancels the alarm operation.
    Security
    Operation signals are sent as rolling codes.
    Transmitter recognition code registration
    Enables the registration (writing and storing) of transmitter recognition codes in the EEPROM that is contained in the door control receiver.
    1. *1: w/ Wireless Door Lock Buzzer
    2. *2 w/ Panic Alarm Function

← SYSTEM DESCRIPTION (Jul 2007 – Oct 2010)HOW TO PROCEED WITH TROUBLESHOOTING (Jul 2007 – Oct 2010) →