2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

CUSTOMIZE PARAMETERS

Troubleshooting · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the tester on.

  4. Enter the following menus: Body / Main Body / Utility / Customize.

  5. Select the setting by referring to the table below.

    Main Body 
    Display
    Default
    Content
    Setting
    Hazard Answer Back
    ON
    When wireless lock switch on transmitter pressed, illuminates all hazard warning lights once. When unlock switch pressed, all hazard warning lights illuminate twice.
    ON/OFF
    Wireless Control
    ON
    ON /OFF of wireless door lock function.
    ON/OFF
    Auto Lock Time
    30 seconds
    Time until relocking after unlocking with wireless door lock function.
    60/30 seconds
    Open Door Warning*1
    ON
    If a door is not completely closed and LOCK is pressed, this function sounds a buzzer for 10 seconds.
    ON/OFF
    Wireless Auto Lock
    ON
    Function of automatically looking doors after unlocking doors with wireless key.
    ON/OFF
    1. *1: w/ Wireless door lock buzzer

← REGISTRATION (from Jul 2007)CUSTOMIZE PARAMETERS (from Nov 2010) →