2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

CUSTOMIZE PARAMETERS

Troubleshooting · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menu: Utility / Customize / Wireless Door Lock.

  5. Select the setting by referring to the table below.

    Wireless Door Lock 
    Display
    Default
    Content
    Setting
    Open Door Warning*1
    ON
    If a door is not completely closed and the transmitter lock switch is pressed, this function makes the buzzer sound for 10 seconds.
    ON/OFF
    Hazard Answer Back
    ON
    When wireless lock switch on the transmitter pressed, this function illuminates the hazard warning lights once. When the unlock switch is pressed, the hazard warning lights illuminate twice.
    ON/OFF
    Wireless Buzzer Vol
    Max
    This function changes the wireless door lock buzzer volume.
    OFF/ Min/Mid1/Mid2/Mid3/Max
    Wireless Control
    ON
    The function that turns the wireless door lock on or off.
    ON/OFF
    Panic Function*2
    ON
    The function to operate the theft deterrent system by continuously pressing the panic switch on the transmitter for 0.8 seconds.
    ON/OFF
    Auto Lock Time
    30 s
    The function that changes the time until relocking after unlocking the doors with the wireless door lock function.
    30 s, 60 s or 120 s
    1. *1: w/ Wireless Door Lock Buzzer
    2. *2: w/ Panic Alarm Function

← CUSTOMIZE PARAMETERS (Jul 2007 – Oct 2010)PROBLEM SYMPTOMS TABLE (Jul 2007 – Oct 2010) →