2011-2016 FJ Cruiser · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built Jul 2007 – Oct 2012

Versions by build date: Jul 2007 – Oct 2012 from Nov 2012


INSPECT FUEL SENDER GAUGE ASSEMBLY

E127934E01
  1. Check the fuel sender gauge resistance.

    1. Check that the float moves smoothly between the F level (upper end) and E level (lower end).

    2. Using an ohmmeter, measure the resistance.

      Standard resistance:
      Tester Condition
      Condition
      Specified Condition
      1 - 2
      F (Upper End)
      12.0 to 18.0 Ω
      1 - 2
      E (Lower End)
      405.0 to 415.0 Ω

      If the result is not as specified, replace the fuel sender gauge assembly.

← REMOVAL (from Aug 2009)INSPECTION (from Nov 2012) →