HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
- HINT:
- In accordance with the following procedures, troubleshoot the audio and visual system.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.INSPECT BATTERY VOLTAGE |
- Standard Voltage:
- 11 to 14 V
| |||||
| 3.BASIC INSPECTION |
Turn the ignition switch to ACC.
Check whether the display appears on the radio receiver.
Result
Proceed to
Display appears
A
Display does not appear
B
|
|||||
| |||||
| 4.PROBLEM SYMPTOMS TABLE |
| Result |
Proceed to |
| Fault not listed in problem symptoms table |
A |
| Fault listed in problem symptoms table |
B |
|
|||||
| |||||
| 5.OVERALL ANALYSIS AND TROUBLESHOOTING |
Terminals of ECU (Click here)
| |||||
| 6.ADJUST, REPAIR OR REPLACE |
| |||||
| 7.CONFIRMATION TEST |
| |||||