2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


CHECK POWER DOOR LOCK OPERATION
  1. Check that all doors lock when the door control switch (for manual operation) is turned to LOCK and all doors unlock when turned to UNLOCK.

  1. Check that all doors lock when the door lock key cylinder is turned to LOCK using the mechanical key and unlock when turned to UNLOCK using the mechanical key.

  1. Check the key lock-in prevention function.

    NOTICE:
    Perform this operation with the driver door window open to prevent the key from being locked inside the vehicle.


    1. Insert the ignition key into the ignition key cylinder.

    2. Check that all doors are immediately unlocked when the driver side door lock knob is turned to the lock position with the driver door open.

    3. Check that all doors are immediately unlocked when the door control switch of power window regulator master switch assembly or door control switch assembly*1 is turned to the lock position with the driver door open.

      1. *1 for LHD

    4. Check that all doors are unlocked when the driver door is closed after the driver door lock knob is held in the lock position for 2 seconds with the driver door open.

← ON-VEHICLE INSPECTION (Jul 2007 – Oct 2010)All Doors cannot be Locked / Unlocked Simultaneously (Jul 2007 – Oct 2010) →