B1000/31 Center Airbag Sensor Assembly Malfunction
Diagnostic trouble codes · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2011 Aug 2011 – Jul 2012 from Aug 2012
DESCRIPTION
The center airbag sensor assembly consists of parts including the airbag sensor, the safing sensor, the drive circuit, the diagnosis circuit, and the ignition control.When the center airbag sensor assembly receives signals from the airbag sensor, it determines whether or not the SRS should be activated.
DTC B1000/31 is set when a malfunction is detected in the center airbag sensor assembly.
| DTC No. |
DTC Detecting Condition |
Trouble Area |
| B1000/31 |
|
|
- HINT:
- When any other DTCs are set simultaneously with B1000/31, repair the malfunctions indicated by those DTCs first.
INSPECTION PROCEDURE
| 1. CHECK CENTER AIRBAG SENSOR ASSEMBLY |
Turn the ignition switch to the lock position.

Disconnect the negative (-) terminal cable from the battery, and wait for at least 90 seconds.
Connect the negative (-) terminal cable to the battery, and wait for at least 2 seconds.
Turn the ignition switch to the on position, and wait for at least 60 seconds.
Clear any DTCs stored in the memory (Click here).
Turn the ignition switch to the lock position.
Turn the ignition switch to the on position, and wait for at least 60 seconds.
Check for DTCs (Click here).
- OK:
- DTC B1000/31 is not output.
|
|
||||
| OK | ||
| ||
