2011-2016 FJ Cruiser · Service Manual BRAKE

INSPECTION

Inspection · Vehicles built from Jul 2007


INSPECT YAW RATE AND DECELERATION SENSOR
  1. Check the yaw rate and deceleration sensor.
    If any of the following occurs, replace the yaw rate and deceleration sensor with a new one.

    1. The surface of the yaw rate and deceleration sensor is cracked, dented or chipped.
    2. The connector is scratched, cracked, or damaged.
    3. The yaw rate and deceleration sensor has been dropped.

← REMOVAL (from Aug 2012)INSTALLATION (Jul 2007 – Oct 2010) →