HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built from Aug 2011
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2011 from Aug 2011
- HINT:
- Use these procedures to troubleshoot the power window control system.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
| |||||
| 3.PROBLEM SYMPTOMS TABLE |
| Result |
Proceed to |
| Fault is not listed in problem symptoms table |
A |
| Fault is listed in problem symptoms table |
B |
|
|||||
| |||||
| 4.OVERALL ANALYSIS AND TROUBLESHOOTING |
Terminals of ECU (Click here)
On-vehicle Inspection (Click here)
| |||||
| 5.REPAIR OR REPLACE |
| |||||
| 6.CONFIRMATION TEST |
| |||||