2011-2016 FJ Cruiser · Service Manual BODY

TERMINALS OF ECU

System information · Vehicles built from Aug 2011

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2011 from Aug 2011


CHECK POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY
B293377E01
Text in Illustration 
*A
for LHD
*B
for RHD
  1. Disconnect the H8 or G8 power window regulator master switch assembly connector.

  2. Measure the resistance and voltage according to the value(s) in the table below.

    for LHD 
    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    H8-15 (B) - Body ground
    W - Body ground
    Ignition power supply
    Ignition switch off
    Below 1 V
    Ignition switch ON
    11 to 14 V
    H8-7 (E) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    for RHD 
    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    G8-15 (B) - Body ground
    W - Body ground
    Ignition power supply
    Ignition switch off
    Below 1 V
    Ignition switch ON
    11 to 14 V
    G8-7 (E) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    If the result is not as specified, there may be a malfunction on the wire harness side.

  3. Reconnect the H8 or G8 power window regulator master switch assembly connector.

  4. Measure the voltage according to the value(s) in the table below.

    for LHD 
    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    H8-10 (U) - H8-7 (E)
    L - W-B
    Power window motor UP output
    Ignition switch ON, driver side power window switch OFF → UP (manual operation)
    Below 1 V → 11 to 14 V
    H8-12 (D) - H8-7 (E)
    L-B - W-B
    Power window motor DOWN output
    Ignition switch ON, driver side power window switch OFF → DOWN (manual operation)
    Below 1 V → 11 to 14 V
    Ignition switch ON, driver side power window fully closed → driver side power window switch DOWN (AUTO operation) → driver side power window fully open
    Below 1 V → 11 to 14 V → Below 1 V
    for RHD 
    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    G8-18 (U) - G8-7 (E)
    L - W-B
    Power window motor UP output
    Ignition switch ON, driver side power window switch OFF → UP (manual operation)
    Below 1 V → 11 to 14 V
    G8-16 (D) - G8-7 (E)
    L-B - W-B
    Power window motor DOWN output
    Ignition switch ON, driver side power window switch OFF→ DOWN (manual operation)
    Below 1 V → 11 to 14 V
    Ignition switch ON, driver side power window fully closed → driver side power window switch DOWN (AUTO operation) → driver side power window fully open
    Below 1 V → 11 to 14 V
    If the result is not as specified, the power window regulator master switch assembly may have a malfunction.

  5. Check the AUTO light illumination.

    1. After turning the ignition switch ON, check that the AUTO light illuminates (amber).


CHECK POWER WINDOW REGULATOR SWITCH ASSEMBLY
B121518E37
Text in Illustration 
*A
for LHD
*B
for RHD
  1. Disconnect the G6 or H7 power window regulator switch assembly connector.

  2. Measure the voltage according to the value(s) in the table below.

    for LHD 
    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    G6-3 (B) - Body ground
    W - Body ground
    Ignition power supply
    Ignition switch off
    Below 1 V
    Ignition switch ON
    11 to 14 V
    G6-1 (D) - Body ground
    L-B - Body ground
    Power window motor DOWN output
    Ignition switch ON, power window switch OFF → DOWN
    Below 1 V → 11 to 14 V
    G6-2 (SD) - Body ground
    R - Body ground
    Power window motor DOWN input (Remote)
    Ignition switch ON, power window master switch OFF → DOWN (Remote)
    Below 1 V → 11 to 14 V
    G6-4 (U) - Body ground
    L - Body ground
    Power window motor UP output
    Ignition switch ON, power window switch OFF → UP
    Below 1 V → 11 to 14 V
    G6-5 (SU) - Body ground
    R-B - Body ground
    Power window motor UP input (Remote)
    Ignition switch ON, power window master switch OFF → UP (Remote)
    Below 1 V → 11 to 14 V
    for RHD 
    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    H7-3 (B) - Body ground
    W - Body ground
    Ignition power supply
    Ignition switch off
    Below 1 V
    Ignition switch ON
    11 to 14 V
    H7-1 (D) - Body ground
    L-B - Body ground
    Power window motor DOWN output
    Ignition switch ON, power window switch OFF → DOWN
    Below 1 V → 11 to 14 V
    H7-2 (SD) - Body ground
    R - Body ground
    Power window motor DOWN input (Remote)
    Ignition switch ON, power window master switch OFF → DOWN (Remote)
    Below 1 V → 11 to 14 V
    H7-4 (U) - Body ground
    L - Body ground
    Power window motor UP output
    Ignition switch ON, power window switch OFF → UP
    Below 1 V → 11 to 14 V
    H7-5 (SU) - Body ground
    R-B - Body ground
    Power window motor UP input (Remote)
    Ignition switch ON, power window master switch OFF → UP (Remote)
    Below 1 V → 11 to 14 V
    If the result is not as specified, there may be a malfunction on the wire harness side.

  3. Reconnect the G6 or H7 power window regulator switch assembly connector.

← TERMINALS OF ECU (Nov 2010 – Jul 2011)ON-VEHICLE INSPECTION (from Jul 2007) →