HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.INSPECT BATTERY VOLTAGE |
- Standard Voltage:
- 11 to 14 V
- HINT:
- If the voltage is below 11 V, recharge or replace the battery before proceeding.
| |||||
| 3.PROBLEM SYMPTOMS TABLE |
| Result |
Proceed to |
| Fault is not listed in Problem Symptoms Table |
A |
| Fault is listed in Problem Symptoms Table |
B |
|
|||||
| |||||
| 4.OVERALL ANALYSIS AND TROUBLESHOOTING |
Operation Check (Click here).
Terminals of ECU (Click here).
| |||||
| 5.ADJUST, REPAIR OR REPLACE |
| |||||
| 6.CONFIRMATION TEST |
| |||||