2011-2016 FJ Cruiser · Service Manual HEATER & AIR CONDITIONING SYSTEM

INSPECTION

Inspection · Vehicles built Jul 2007 – Jul 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009


INSPECT MAGNET CLUTCH ASSEMBLY

I104032E01
  1. Check the magnet clutch operation.

    1. Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive lead is connected to terminal 3 (MG+) of the magnet clutch, and the negative lead is connected to the earth wire.
      If the operation is not as specified, replace the magnet clutch assembly.

  1. Measure the resistance.

  1. Measure the resistance between terminals 1 and 2.

    Standard resistance:
    165 to 205 Ω at 25°C (77°F)
    If the resistance is not as specified, replace the cooler compressor assembly.

← DISASSEMBLY (from Aug 2009)INSPECTION (from Aug 2009) →