2011-2016 FJ Cruiser · Service Manual HEATER & AIR CONDITIONING SYSTEM

DISASSEMBLY

Removal / installation · Vehicles built from Aug 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009


1. REMOVE COOLER BRACKET

I105068
  1. Remove the screw and the cooler bracket.


2. REMOVE MAGNET CLUTCH ASSEMBLY

I105069E01
  1. Clamp the cooler compressor in a vise.

  1. Using SST, hold the magnet clutch hub.

    SST
    09985-00260  

  1. Remove the bolt, magnet clutch hub and magnet clutch washer.

    HINT:
    There is no set number of magnet clutch washers since they are used for adjusting.

  1. I034346
    Using a snap ring expander, remove the snap ring and the magnet clutch rotor.

    NOTICE:
    Do not damage the seal cover of the bearing when removing the snap ring.

  1. Disconnect the connector.

  1. Using a snap ring expander, remove the snap ring and magnet clutch stator.

← DISASSEMBLY (Jul 2007 – Jul 2009)INSPECTION (Jul 2007 – Jul 2009) →