INSPECTION
Inspection · Vehicles built from Aug 2009
Versions by build date: Jul 2007 – Jul 2009 from Aug 2009
| INSPECT MAGNET CLUTCH ASSEMBLY |
![]() ![]() |
Check the magnet clutch operation.
Confirm that the magnet clutch hub and magnet clutch rotor lock when the battery positive lead is connected to terminal 3 of the magnet clutch, and the negative lead is connected to the ground wire.
If the operation is not as specified, replace the magnet clutch assembly.Text in Illustration *1
Magnet Clutch Hub
*2
Magnet Clutch Rotor
*3
Battery
*a
Component without harness connected:
(Magnet clutch)
Measure the resistance.
Measure the resistance between terminals 1 and 2.
- Standard resistance:
- 165 to 205 Ω at 25°C (77°F)


