2011-2016 FJ Cruiser · Service Manual HEATER & AIR CONDITIONING SYSTEM

DISASSEMBLY

Removal / installation · Vehicles built Jul 2007 – Jul 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009


1. REMOVE MAGNET CLUTCH ASSEMBLY

I102475
  1. Clamp the cooler compressor in a vise.

  1. Using SST, hold the magnet clutch hub.

    SST
    09960-10010   (09962-01000, 09963-00500)

  1. Remove the bolt, magnet clutch hub and magnet clutch washer(s).

    HINT:
    There is no set number of magnet clutch washers since they are used for adjusting.

  1. I104018
    Using a snap ring expander, remove the snap ring and the magnet clutch rotor.

    NOTICE:
    Do not damage the seal cover of the bearing when removing the snap ring.

  1. Disconnect the connector.

  1. I104019
    Using a snap ring expander, remove the snap ring and magnet clutch stator.


2. REMOVE COOLER BRACKET

I102478
  1. Remove the screw and the cooler bracket.

← REMOVAL (from Aug 2009)DISASSEMBLY (from Aug 2009) →