2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012

CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (Click here).


1. INSTALL CLEARANCE WARNING ECU ASSEMBLY

  1. B135078
    Insert the hook into the instrument panel reinforcement hole and install the clearance warning ECU with the nut.

    Torque:
    12.5 N*m{ 125 kgf*cm , 9 ft.*lbf }

  1. Connect the clearance warning ECU connector.


2. INSTALL INSTRUMENT PANEL SUB-ASSEMBLY

B133866E01
  1. Install the lower instrument panel with the 2 <C> bolts, 2 <E> bolts, 7 <F> bolts and nut <G>.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf } for bolt <C>

  1. Engage the clamps and connect the connectors.


3. CONNECT PASSENGER AIRBAG CONNECTOR

B133891
  1. Connect the passenger airbag connector.


4. INSTALL INSTRUMENT PANEL FINISH PANEL END

  1. B133889
    Engage the 3 claws and install the instrument panel finish panel end.


5. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY

B130584E01

HINT:
Use the same procedure for both sides.

  1. Connect the speaker connector.

  1. Insert the 2 hooks into the instrument panel and install the front No. 2 speaker with the 2 bolts.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }


6. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY RH

  1. B133865
    Engage the 4 clips and claw and install the instrument panel speaker panel.


7. INSTALL INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY LH

HINT:
Use the same procedure as for the RH side.


8. INSTALL INSTRUMENT PANEL REGISTER ASSEMBLY RH

  1. B176533E01
    Install the No. 2 instrument panel register assembly (Previous Version).

    1. Engage the 4 clips and 2 claws and install the instrument panel register.

    2. Install the clip.

  1. B188206E01
    Install the No. 2 instrument panel register assembly (New Version).

    1. Engage the 4 clips and 2 claws and install the instrument panel register.

    2. Install the bolt and clip.

    3. B188207E01
      Engage the 2 claws and install the instrument panel hole cover.


9. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH

  1. B133857
    Install the connectors to the instrument panel lower finish panel.

  1. Engage the claw and 2 clips and install the instrument panel lower finish panel.

  1. Install screw <A>.


10. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

  1. B133856
    Install the glove compartment door assembly with the 3 hinges while holding it horizontal.

  1. B133854E01
    Slightly flex the upper part of the glove compartment door assembly, and install the glove compartment door assembly.

  1. Install the glove compartment door stoppers onto the glove compartment door.


11. INSTALL COMBINATION METER ASSEMBLY

  1. B133863
    Connect the 2 connectors and the clamp.

  1. B133862
    Install the combination meter assembly with the 4 screws.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }


12. INSTALL INSTRUMENT CLUSTER LOWER FINISH PANEL

B133861
  1. Connect the connectors.

  1. Engage the 3 clips and 4 claws and install the instrument cluster lower finish panel.


13. INSTALL INSTRUMENT LOWER PANEL

  1. B133864
    Install the lower instrument panel with the 4 <F> bolts.


14. INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY LH

  1. B133860
    Engage the 5 clips and claw and install the lower instrument panel finish panel.

  1. Install the 2 <F> bolts.


15. INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

  1. B133859
    Engage the 3 claws and install the hood lock control lever.


16. INSTALL INSTRUMENT PANEL REGISTER ASSEMBLY LH

  1. B133853
    Engage the 4 clips and 2 claws and install the instrument panel register.


17. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY

  1. B133852
    Engage the 3 clips and 2 claws and install the instrument lower cover.

  1. Install the 2 <F> bolts and 2 clips.


18. INSTALL FRONT CONSOLE BOX UPPER PANEL GARNISH

B133902E01
  1. Slide the console upper panel garnish toward the front of the vehicle and engage claw B.

  1. Engage the claw A and clip and install the console upper panel garnish.


19. INSTALL FRONT CONSOLE BOX

  1. B133851
    Engage the 5 claws and install the front console box.

  1. Install the 4 <D> screws.


20. INSTALL FRONT CONSOLE BOX BOTTOM MAT

  1. B133899
    Install the box bottom mat.


21. INSTALL FRONT CONSOLE BOX UPPER PANEL SUB-ASSEMBLY

  1. B133897
    Engage the 3 claws and 5 clips and install the console upper rear panel.


22. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)

  1. B133896
    Install the shift lever knob.


23. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

  1. B133894
    Install the shift lever knob.


24. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY

B133901E01
  1. Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 C claws.

  1. Engage the 4 claws and install the parking brake hole cover.


25. INSTALL RADIO RECEIVER ASSEMBLY

  1. B130576
    Connect the plug, the head unit connector and the 2 radio connectors.

  1. B138605
    Align the 2 bosses of the radio bracket with the hole in the instrument panel and install the radio receiver with the 4 bolts.

    Torque:
    2.5 N*m{ 25 kgf*cm , 22 in.*lbf }


26. INSTALL INTEGRATION CONTROL PANEL ASSEMBLY

B133888
  1. Connect the 3 connectors.

  1. Engage the 4 clips and install the integration control panel assembly.

  1. Install the 2 <H> screws.


27. INSTALL INSTRUMENT PANEL GARNISH LH

  1. B133886
    Engage the 3 clips and install the instrument panel garnish.

  1. Install 2 <H> screws.


28. INSTALL INSTRUMENT PANEL GARNISH RH

HINT:
Use the same procedure as for the RH side.


29. INSTALL ASSIST GRIP RETAINER RH

  1. B133881
    Install the assist grip retainer with the 2 bolts.

    Torque:
    29 N*m{ 296 kgf*cm , 21 ft.*lbf }


30. INSTALL ASSIST GRIP RETAINER LH

HINT:
Use the same procedure as for the RH side.


31. INSTALL FRONT PILLAR GARNISH RH

  1. B130608
    Engage the claw and the 2 clips and install the front pillar garnish.


32. INSTALL FRONT PILLAR GARNISH LH

HINT:
Use the same procedure as for the RH side.


33. INSTALL ASSIST GRIP ASSEMBLY

B138478E01

HINT:
Use the same procedure to install all the assist grips.

  1. Install the assist grip with the 2 screws.


34. INSTALL ASSIST GRIP PLUG

B138477E01

HINT:
Use the same procedure to install all the assist grip plugs.

  1. Engage the 2 claws and install the assist grip plug.


35. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

  1. B138475
    Install the front door opening trim weatherstrip.


36. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

HINT:
Use the same procedure as for the RH side.


37. INSTALL COWL SIDE TRIM BOARD RH

  1. B130599
    Engage the 2 claws and install the cowl side trim board.

  1. Install the clip.


38. INSTALL COWL SIDE TRIM BOARD LH

HINT:
Use the same procedure as for the RH side.


39. INSTALL FOOTREST CLIP

B130588

HINT:
Use the same procedure for both sides.

  1. Engage the 2 claws and install the footrest clip.


40. INSTALL FRONT FLOOR FOOTREST

  1. B130589
    Engage the 2 studs and install the front floor footrest.


41. INSTALL FRONT DOOR SCUFF PLATE RH

  1. B130597
    Engage the 14 claws and install the door scuff plate.


42. INSTALL FRONT DOOR SCUFF PLATE LH

HINT:
Use the same procedure as for the RH side.


43. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }


44. INSPECT SRS WARNING LIGHT
(Click here)
← REMOVAL (from Aug 2012)INSTALLATION (Nov 2010 – Jul 2012) →