INSTALLATION
Removal / installation · Vehicles built from Aug 2012
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012
| 1.
INSTALL GLOVE COMPARTMENT DOOR CHECK CUSHION (for RHD) |
 |
Install the 3 glove compartment door check cushions.
| 2.
INSTALL NO. 2 INSTRUMENT PANEL CUSHION |
 |
Install the new No. 2 instrument panel cushion.
| 3.
INSTALL INSTRUMENT PANEL PLATE RH |
 |
Install the instrument panel plate RH with the 2 screws.
| 4.
INSTALL INSTRUMENT PANEL FINISH PANEL END LH |
 |
Engage the 3 claws and install the instrument panel finish panel end.
| 5.
INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY RH |
 |
Engage the 2 clips and install the lower instrument panel.
| 6.
INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY LH |
 |
- HINT:
- Use the same procedure as for the RH side.
| 7.
INSTALL ACCESSORY METER BRACKET |
 |
Install the accessory meter bracket with the 2 clips.
| 8.
INSTALL INSTRUMENT PANEL CENTER BRACKET SUB-ASSEMBLY |
 |
Install the instrument panel center bracket with the 2 <A> screws.
| 9.
INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
|
 |
- Engage the 5 hooks.
Engage the 5 hooks and install the front passenger airbag assembly onto the instrument panel.
- Install the 2 screws.
| 10.
INSTALL NO. 2 INSTRUMENT PANEL WIRE (for LHD) |
 |
Engage the 16 clamps and install the instrument panel wire.
| 11.
INSTALL NO. 2 INSTRUMENT PANEL WIRE (for RHD) |
 |
Engage the 15 clamps and install the instrument panel wire.
| 12.
INSTALL NO. 3 HEATER TO REGISTER DUCT |
 |
Install the heater to register duct with the 2 <A> screws.
| 13.
INSTALL DEFROSTER NOZZLE ASSEMBLY |
 |
Engage the 9 claws and install the defroster nozzle.
Install the 5 <A> screws.
| 14.
INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT |
 |
Engage the 2 claws and install the side defroster nozzle duct.
Install the screw <A>.
| 15.
INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT |
 |
Engage the 2 claws and install the side defroster nozzle duct.
Install the screw <A>.
| 16.
INSTALL INSTRUMENT CLUSTER LOWER CENTER FINISH PANEL SUB-ASSEMBLY |
 |
Engage the 2 clips and 3 claws and install the instrument cluster lower center finish panel.
Install the 3 <A> screws.
| 17.
INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY |
 |
Engage the 4 claws and install the instrument cluster center finish panel.
Install the 2 <A> screws.
| 18.
INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
 |
Engage the 2 clips and 2 claws and install the instrument cluster finish panel.
Install the 3 <A> screws.
| 19.
INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY |
 |
Engage the claw and install the glove compartment door stopper.
| 20.
INSTALL NO. 2 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY (for LHD) |
 |
Engage the 4 clips and 2 claws and install the instrument panel box door.
Install the 2 <G> screws.
| 21.
INSTALL NO. 2 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY (for RHD) |
 |
Engage the 5 clips and install the instrument panel box door.
Install the 2 <G> screws.
| 22.
INSTALL ACCESSORY METER ASSEMBLY |
 |
- Install the accessory meter with the 2 nuts.
| 23.
INSTALL METER COVER |
 |
Engage the 6 clips and install the meter cover.
| 24.
INSTALL INSTRUMENT PANEL SUB-ASSEMBLY (for LHD) |
 |
Install the lower instrument panel with the 2 <B> bolts, 2 <D> bolts, 7 <C> bolts and nut <F>.


-
Torque:
- 20 N*m{
204 kgf*cm
, 15 ft.*lbf
}
for bolt <B>
Engage the clamps and connect the connectors.
| 25.
INSTALL INSTRUMENT PANEL SUB-ASSEMBLY (for RHD) |
 |
Install the lower instrument panel with the 2 <B> bolts, 2 <D> bolts, 2 <E> bolts, 7<C> bolts and nut <F>.


-
Torque:
- 20 N*m{
204 kgf*cm
, 15 ft.*lbf
}
for bolt <B>
Engage the clamps and connect the connectors.
| 26.
CONNECT PASSENGER AIRBAG CONNECTOR |
 |
Connect the passenger airbag connector.
| 27.
INSTALL ASSIST GRIP RETAINER RH (w/ Assist Grip) |
 |
Install the assist grip retainer with the 2 bolts.
-
Torque:
- 29 N*m{
296 kgf*cm
, 21 ft.*lbf
}
| 28.
INSTALL ASSIST GRIP RETAINER LH (w/ Assist Grip) |
 |
- HINT:
- Use the same procedure as for the RH side.
| 29.
INSTALL FRONT NO. 2 SPEAKER ASSEMBLY
|
 |
- Connect the speaker connector.
Insert the 2 hooks into the 2 instrument panel holes and install the front speaker with the 2 bolts.
-
Torque:
- 2.5 N*m{
25 kgf*cm
, 22 in.*lbf
}
| 30.
INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY |
 |
Engage the 4 clips and claw and install the instrument panel speaker panel.
| 31.
INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY |
 |
- HINT:
- Use the same procedure as for the RH side.
| 32.
INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY |
 |
Engage the 4 clips and 2 claws and install the instrument panel register.
Install the bolt and clip.
- Engage the 2 claws and install the instrument panel hole cover.
| 33.
INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY |
 |
Install the connectors to the instrument panel lower finish panel.
Engage the claw and 2 clips and install the instrument panel lower finish panel.
Install the screw <A>.
| 34.
INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
 |
- Install the glove compartment door assembly with the 3 hinges while holding it horizontal.
Slightly flex the upper part of the glove compartment door assembly, and install the glove compartment door assembly.
Install the glove compartment door stoppers onto the glove compartment door.
| 35.
INSTALL COMBINATION METER ASSEMBLY
|
 |
Connect the 2 connectors and the clamp.
Install the combination meter assembly with the 4 screws.
-
Torque:
- 7.0 N*m{
71 kgf*cm
, 62 in.*lbf
}
| 36.
INSTALL INSTRUMENT CLUSTER FINISH PANEL (for LHD) |
 |
Connect the connectors.
Engage the 3 clips and the 4 claws and install the instrument cluster lower finish panel.
| 37.
INSTALL INSTRUMENT CLUSTER FINISH PANEL (for RHD) |
 |
Connect the connectors.
Engage the 8 clips and install the instrument cluster lower finish panel.
| 38.
INSTALL LOWER INSTRUMENT PANEL LH (for LHD) |
 |
Install the lower instrument panel with the 4 <E> bolts.
| 39.
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for LHD) |
 |
Engage the 5 clips and claw and install the lower instrument panel finish panel.
Install the 2 <E> bolts.
| 40.
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL (for RHD) |
 |
Connect the connectors.
Engage the 8 clips and 4 guides and install the lower instrument panel finish panel.
Install the 2 <E> bolts.
| 41.
INSTALL INSTRUMENT PANEL FINISH PLATE
|
 |
- Install the instrument panel finish plate.
Text in Illustration
*1
|
Instrument Panel Finish Plate
|
| 42.
INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY (for RHD) |
 |
Engage the 3 claws and install the fuel lid lock open lever.
| 43.
INSTALL HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
 |
Engage the 3 claws and install the hood lock control lever.
| 44.
INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY |
 |
Engage the 4 clips and 2 claws and install the instrument panel register.
| 45.
INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY |
 |
Engage the 3 clips and 2 claws and install the instrument lower cover.
Install the 2 <E> bolts and 2 clips.
| 46.
INSTALL CONSOLE UPPER PANEL NO. 1 GARNISH (for LHD) |
 |
- Slide the console upper panel garnish toward the front of the vehicle and engage guide.
Engage the claw and clip and install the console upper panel garnish.
| 47.
INSTALL CONSOLE UPPER PANEL NO. 1 GARNISH (for RHD) |
 |
- Slide the console upper panel garnish toward the front of the vehicle and engage guide.
Engage the claw and 2 clips and install the console upper panel garnish.
| 48.
INSTALL FRONT CONSOLE BOX |
 |
Engage the 5 guides and install the front console box.
Install the 4 <H> bolts.
| 49.
INSTALL BOX BOTTOM MAT |
 |
Install the box bottom mat.
| 50.
INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
 |
Engage the 3 guides and 5 clips and install the console upper rear panel.
| 51.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD) |
 |
- Install the shift lever knob.
| 52.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) |
 |
- Install the shift lever knob.
| 53.
INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
 |
- Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 guides.
Engage the 4 claws and install the parking brake hole cover.
| 54.
INSTALL RADIO RECEIVER ASSEMBLY (w/ Radio Receiver)
|
 |
- Connect the connectors.
Align the 2 bosses of the radio bracket with the hole in the instrument panel and install the radio receiver with the 4 bolts.
-
Torque:
- 2.5 N*m{
25 kgf*cm
, 22 in.*lbf
}
| 55.
INSTALL RADIO TUNER OPENING COVER (w/o Radio Receiver) |
 |
- Align the 2 bosses of the radio bracket with the hole in the instrument panel and install the radio tuner opening cover with the 4 bolts.
-
Torque:
- 2.5 N*m{
25 kgf*cm
, 22 in.*lbf
}
| 56.
INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY |
 |
Connect the 3 connectors.
Engage the 4 clips and install the integration control panel assembly.
Install the 2 screws.
| 57.
INSTALL INSTRUMENT PANEL GARNISH LH |
 |
Engage the 3 clips and install the instrument panel garnish.
Install the screw <G>.
| 58.
INSTALL INSTRUMENT PANEL GARNISH RH |
 |
Engage the 3 clips and install the instrument panel garnish.
Install the screw <G>.
| 59.
INSTALL FRONT PILLAR GARNISH RH
|
 |
w/ Assist Grip:
Engage the guide and the 2 clips and install the front pillar garnish.
w/o Assist Grip:
Engage the guide and the 2 clips and install the front pillar garnish.
Install the bolt.
- Engage the claw and close the cover.
| 60.
INSTALL FRONT PILLAR GARNISH LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 61.
INSTALL ASSIST GRIP ASSEMBLY (w/ Assist Grip)
|
 |
- HINT:
- Use the same procedure to install all the assist grips.
Install the assist grip with the 2 bolts.
-
Torque:
- 8.0 N*m{
82 kgf*cm
, 71 in.*lbf
}
| 62.
INSTALL ASSIST GRIP PLUG (w/ Assist Grip)
|
 |
- HINT:
- Use the same procedure to install all the assist grip plugs.
Text in Illustration
*a
|
for RH Side
|
*b
|
for LH Side
|
Engage the 2 claws and install the assist grip plug.
| 63.
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
 |
Install the front door opening trim weatherstrip.
| 64.
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH |
 |
Install the front door opening trim weatherstrip.
| 65.
INSTALL COWL SIDE TRIM BOARD RH
|
 |
Engage the 2 claws and install the cowl side trim board.
Install the clip.
| 66.
INSTALL COWL SIDE TRIM BOARD LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 67.
INSTALL FOOTREST CLIP (for LHD)
|
 |
- HINT:
- Use the same procedure for both sides.
Engage the 2 claws and install the footrest clip.
| 68.
INSTALL FRONT FLOOR FOOTREST (for LHD)
|
 |
- Engage the 2 studs and install the front floor footrest.
| 69.
INSTALL FRONT DOOR SCUFF PLATE RH
|
 |
Engage the 14 claws and install the door scuff plate.
| 70.
INSTALL FRONT DOOR SCUFF PLATE LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 71.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 5.4 N*m{
55 kgf*cm
, 48 in.*lbf
}
| 72.
INSPECT SRS WARNING LIGHT |
 |
(Click here)