INSTALLATION
Removal / installation · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012
| 1.
INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY RH |
 |
- Engage the 2 clips and install the lower instrument panel.
| 2.
INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY LH |
 |
- HINT:
- Use the same procedure as for the RH side.
| 3.
INSTALL ACCESSORY METER BRACKET |
 |
- Install the accessory meter bracket with the 2 clips.
| 4.
INSTALL INSTRUMENT PANEL CENTER BRACKET SUB-ASSEMBLY |
 |
- Install the instrument panel center bracket with the 2 <B> screws.
| 5.
INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
|
 |
- Engage the 5 hooks.
Engage the 5 hooks and install the front passenger airbag assembly onto the instrument panel.
- Install the 2 screws.
| 6.
INSTALL NO. 2 INSTRUMENT PANEL WIRE |
 |
Engage the 16 clamps and install the instrument panel wire.


| 7.
INSTALL NO. 3 HEATER TO REGISTER DUCT |
 |
- Install the heater to register duct with the 2 <B> screws.
| 8.
INSTALL DEFROSTER NOZZLE ASSEMBLY |
 |
- Engage the 9 claws and install the defroster nozzle.
Install the 5 <B> screws.
| 9.
INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT |
 |
- Engage the 2 claws and install the side defroster nozzle duct.
Install screw <B>.
| 10.
INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT |
 |
- Engage the 2 claws and install the side defroster nozzle duct.
Install screw <B>.
| 11.
INSTALL INSTRUMENT CLUSTER LOWER CENTER FINISH PANEL SUB-ASSEMBLY |
 |
- Engage the 2 clips and 3 claws and install the instrument cluster lower center finish panel.
Install the 3 <B> screws.
| 12.
INSTALL INSTRUMENT CLUSTER CENTER FINISH PANEL SUB-ASSEMBLY |
 |
- Engage the 4 claws and install the instrument cluster center finish panel.
Install the 2 <B> screws.
| 13.
INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
 |
- Engage the 2 clips and 2 claws and install the instrument cluster finish panel.
Install the 3 <B> screws.
| 14.
INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY |
 |
- Engage the claw and install the glove compartment door stopper.
| 15.
INSTALL NO. 2 INSTRUMENT PANEL BOX DOOR SUB-ASSEMBLY |
 |
- Engage the 4 clips and 2 claws and install the instrument panel box door.
Install the 2 <H> screws.
| 16.
INSTALL ACCESSORY METER ASSEMBLY |
 |
- Install the accessory meter with the 2 nuts.
| 17.
INSTALL METER COVER |
 |
- Engage the 6 clips and install the meter cover.
| 18.
INSTALL INSTRUMENT PANEL SUB-ASSEMBLY |
 |


Install the lower instrument panel with the 2 <C> bolts, 2 <E> bolts, 7 <F> bolts and nut <G>.
-
Torque:
- 20 N*m{
204 kgf*cm
, 15 ft.*lbf
}
for bolt <C>
Engage the clamps and connect the connectors.
| 19.
CONNECT PASSENGER AIRBAG CONNECTOR |
 |
Connect the passenger airbag connector.
| 20.
INSTALL INSTRUMENT PANEL FINISH PANEL END LH |
 |
- Engage the 3 claws and install the instrument panel finish panel end.
| 21.
INSTALL ASSIST GRIP RETAINER RH |
 |
- Install the assist grip retainer with the 2 bolts.
-
Torque:
- 29 N*m{
296 kgf*cm
, 21 ft.*lbf
}
| 22.
INSTALL ASSIST GRIP RETAINER LH |
 |
- HINT:
- Use the same procedure as for the RH side.
| 23.
INSTALL FRONT NO. 2 SPEAKER ASSEMBLY
|
 |
- Connect the speaker connector.
Insert the 2 hooks into the 2 instrument panel holes and install the front speaker bracket with the 2 bolts.
-
Torque:
- 2.5 N*m{
25 kgf*cm
, 22 in.*lbf
}
| 24.
INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY |
 |
- Engage the 4 clips and claw and install the instrument panel speaker panel.
| 25.
INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY |
 |
- HINT:
- Use the same procedure as for the RH side.
| 26.
INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY |
 |
- Install the No. 2 instrument panel register assembly (Previous Version).
Engage the 4 clips and 2 claws and install the instrument panel register.
Install the clip.
- Install the No. 2 instrument panel register assembly (New Version).
Engage the 4 clips and 2 claws and install the instrument panel register.
Install the bolt and clip.
- Engage the 2 claws and install the instrument panel hole cover.
| 27.
INSTALL INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY RH |
 |
- Install the connectors to the instrument panel lower finish panel.
Engage the claw and 2 clips and install the instrument panel lower finish panel.
Install screw <A>.
| 28.
INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY |
 |
- Install the glove compartment door assembly with the 3 hinges while holding it horizontal.
- Slightly flex the upper part of the glove compartment door assembly, and install the glove compartment door assembly.
Install the glove compartment door stoppers onto the glove compartment door.
| 29.
INSTALL COMBINATION METER ASSEMBLY |
 |
- Connect the 2 connectors and the clamp.
- Install the combination meter assembly with the 4 screws.
-
Torque:
- 7.0 N*m{
71 kgf*cm
, 62 in.*lbf
}
| 30.
INSTALL INSTRUMENT CLUSTER FINISH PANEL |
 |
Connect the connectors.
Engage the 3 clips and 4 claws and install the instrument cluster lower finish panel.
| 31.
INSTALL LOWER INSTRUMENT PANEL LH |
 |
- Install the lower instrument panel with the 4 <F> bolts.
| 32.
INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
 |
- Engage the 5 clips and claw and install the lower instrument panel finish panel.
Install the 2 <F> bolts.
| 33.
INSTALL INSTRUMENT PANEL FINISH PLATE
|
 |
Install the instrument panel finish plate.
| 34.
CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
 |
- Engage the 3 claws and install the hood lock control lever.
| 35.
INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY |
 |
- Engage the 4 clips and 2 claws and install the instrument panel register.
| 36.
INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY |
 |
- Engage the 3 clips and 2 claws and install the instrument lower cover.
Install the 2 <F> bolts and 2 clips.
| 37.
INSTALL CONSOLE UPPER PANEL NO. 1 GARNISH |
 |
Slide the console upper panel garnish toward the front of the vehicle and engage claw B.
Engage the claw A and clip and install the console upper panel garnish.
| 38.
INSTALL FRONT CONSOLE BOX |
 |
- Engage the 5 claws and install the front console box.
Install the 4 <D> screws.
| 39.
INSTALL BOX BOTTOM MAT |
 |
- Install the box bottom mat.
| 40.
INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
 |
- Engage the 3 claws and 5 clips and install the console upper rear panel.
| 41.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD) |
 |
- Install the shift lever knob.
| 42.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) |
 |
- Install the shift lever knob.
| 43.
INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
 |
Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 C claws.
Engage the 4 claws and install the parking brake hole cover.
| 44.
INSTALL RADIO RECEIVER ASSEMBLY
|
 |
- Connect the plug, the head unit connector and the 2 radio connectors.
- Align the 2 bosses of the radio bracket with the hole in the instrument panel and install the radio receiver with the 4 bolts.
-
Torque:
- 2.5 N*m{
25 kgf*cm
, 22 in.*lbf
}
| 45.
INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY |
 |
Connect the 3 connectors.
Engage the 4 clips and install the integration control panel assembly.
Install the 2 <H> screws.
| 46.
INSTALL INSTRUMENT PANEL GARNISH LH |
 |
- Engage the 3 clips and install the instrument panel garnish.
Install 2 <H> screws.
| 47.
INSTALL INSTRUMENT PANEL GARNISH RH |
 |
- Engage the 3 clips and install the instrument panel garnish.
Install screw <H>.
| 48.
INSTALL FRONT PILLAR GARNISH RH
|
 |
- Engage the claw and the 2 clips and install the front pillar garnish.
| 49.
INSTALL FRONT PILLAR GARNISH LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 50.
INSTALL ASSIST GRIP ASSEMBLY
|
 |
- HINT:
- Use the same procedure to install all the assist grips.
Install the assist grip with the 2 bolts.
-
Torque:
- 8.0 N*m{
82 kgf*cm
, 71 in.*lbf
}
| 51.
INSTALL ASSIST GRIP PLUG
|
 |
- HINT:
- Use the same procedure to install all the assist grip plugs.
Engage the 2 claws and install the assist grip plug.
| 52.
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
 |
Install the front door opening trim weatherstrip.
| 53.
INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH |
 |
Install the front door opening trim weatherstrip.
| 54.
INSTALL COWL SIDE TRIM BOARD RH
|
 |
- Engage the 2 claws and install the cowl side trim board.
Install the clip.
| 55.
INSTALL COWL SIDE TRIM BOARD LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 56.
INSTALL FOOTREST CLIP
|
 |
- HINT:
- Use the same procedure for both sides.
Engage the 2 claws and install the footrest clip.
| 57.
INSTALL FRONT FLOOR FOOTREST
|
 |
- Engage the 2 studs and install the front floor footrest.
| 58.
INSTALL FRONT DOOR SCUFF PLATE RH
|
 |
- Engage the 14 claws and install the door scuff plate.
| 59.
INSTALL FRONT DOOR SCUFF PLATE LH
|
 |
- HINT:
- Use the same procedure as for the RH side.
| 60.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 3.9 N*m{
40 kgf*cm
, 35 in.*lbf
}
| 61.
INSPECT SRS WARNING LIGHT |
 |
(Click here)