REMOVAL
Removal / installation · Vehicles built Jul 2007 – Jul 2009
Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010 Nov 2010 – Jul 2014 from Aug 2014
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
|
| 2.
REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY
|
 |
Remove the 4 bolts, then remove the No. 1 engine under cover.
| 3.
REMOVE FAN & GENERATOR V BELT
|
 |
While releasing the belt tension by turning the belt tensioner counterclockwise, remove the V-ribbed belt from the belt tensioner.
| 4.
DRAIN POWER STEERING FLUID |
|
| 5.
DISCONNECT NO. 1 OIL RESERVOIR TO PUMP HOSE |
 |
Disengage the clip and disconnect the No. 1 oil reservoir to pump hose.
| 6.
DISCONNECT PRESSURE FEED TUBE ASSEMBLY |
 |
Remove the union bolt, then disconnect the pressure feed tube.
Remove the gasket from the pressure feed tube.
| 7.
REMOVE VANE PUMP |
 |
Disconnect the oil pressure switch connector.
Remove the bolt and the wire harness clamp bracket.
- Remove the 2 bolts and the vane pump assembly.