INSTALLATION
Removal / installation · Vehicles built from Jul 2007
| 1. INSTALL CLUTCH RELEASE CYLINDER ASSEMBLY |
![]() ![]() |
Install the clutch release cylinder with the 2 bolts.
- Torque:
- 12 N*m{ 120 kgf*cm , 9 ft.*lbf }
| 2. CONNECT CLUTCH RELEASE CYLINDER TO FLEXIBLE HOSE TUBE |
![]() ![]() |
Using a union nut wrench, connect the flexible hose tube.
- Torque:
- without union nut wrench:
- 15 N*m{ 155 kgf*cm , 11 ft.*lbf }
- with union nut wrench:
- 14 N*m{ 144 kgf*cm , 10 ft.*lbf }
- NOTICE:
- This torque value can be obtained by using a torque wrench with a fulcrum length of 300 mm (11.8 in.) and a union nut wrench with a fulcrum length of 22 mm (0.886 in.) (Click here).
- This torque value is effective when union nut wrench is parallel to a torque wrench.
- This torque value can be obtained by using a torque wrench with a fulcrum length of 300 mm (11.8 in.) and a union nut wrench with a fulcrum length of 22 mm (0.886 in.) (Click here).
Install the clutch line bracket.
- Torque:
- 12 N*m{ 120 kgf*cm , 9 ft.*lbf }
| 3. BLEED CLUTCH PIPE LINE |
Fill the brake reservoir tank with brake fluid and bleed the clutch system.
- Torque:
- 11 N*m{ 110 kgf*cm , 8 ft.*lbf }
| 4. CHECK FOR CLUTCH FLUID LEAKAGE |
| 5. INSTALL NO. 1 CLUTCH HOUSING COVER |
![]() ![]() |
Install the No. 1 clutch housing cover with the 3 bolts.
- Torque:
- 12 N*m{ 120 kgf*cm , 9 ft.*lbf }
| 6. CHECK FLUID LEVEL IN RESERVOIR |




