2011-2016 FJ Cruiser · Service Manual TRANSMISSION

REMOVAL

Removal / installation · Vehicles built from Aug 2014

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2014 from Aug 2014


1. DRAIN CLUTCH FLUID

2. REMOVE NO. 2 EXHAUST FRONT PIPE ASSEMBLY

  1. A129938
    Remove the 2 bolts and 2 nuts and separate the exhaust pipe support, then remove the No. 2 front exhaust pipe.

  1. Remove the front exhaust pipe gasket.


3. REMOVE NO. 2 MANIFOLD STAY

  1. A222091
    Remove the 3 bolts and No. 2 manifold stay from the exhaust manifold sub-assembly LH.


4. REMOVE NO. 1 CLUTCH HOUSING COVER

F050796
  1. Remove the 3 bolts and No. 1 clutch housing cover.


5. REMOVE CLUTCH ACCUMULATOR ASSEMBLY

C133797
  1. Using a union nut wrench, disconnect the clutch release tube from the clutch accumulator assembly.

    HINT:
    Use a container to catch the fluid.

  1. Remove the bolt and clutch release tube.

  1. C133798
    Using a union nut wrench, disconnect the flexible hose tube from the clutch accumulator assembly.

  1. Remove the nut and clutch line bracket.

  1. F050798
    Remove the 3 bolts and clutch accumulator assembly.

← REMOVAL (Nov 2010 – Jul 2014)INSTALLATION (Jul 2007 – Oct 2010) →