2011-2016 FJ Cruiser · Service Manual TRANSMISSION

DISASSEMBLY

Removal / installation · Vehicles built from Jul 2007


1. REMOVE NO. 3 SYNCHRONIZER RING
  1. Remove the No. 3 synchronizer ring from the output shaft.


2. REMOVE OUTPUT SHAFT CENTER BEARING
  1. Remove the output shaft center bearing from the output shaft.


3. REMOVE OUTPUT SHAFT REAR BEARING

F051075E01
  1. Using SST and a press, remove the output shaft rear bearing from the output shaft.

    SST
    09950-00020  
    09950-70010   (09951-07100)
    09950-60010   (09951-00510)

← COMPONENTS (from Jul 2007)INSPECTION (from Jul 2007) →