2011-2016 FJ Cruiser · Service Manual TRANSMISSION

REASSEMBLY

Removal / installation · Vehicles built from Jul 2007


1. INSTALL OUTPUT SHAFT REAR BEARING

F051076E01
  1. Using SST and a press, install a new output shaft rear bearing onto the output shaft.

    SST
    09316-60011   (09316-00011)

  1. Apply a light coat of MP grease to the bearing.


2. INSTALL OUTPUT SHAFT CENTER BEARING
  1. Apply gear grease to the output shaft center bearing and install it onto the output shaft.


3. INSTALL NO. 3 SYNCHRONIZER RING
  1. Apply gear oil to the No. 3 synchronizer ring, and install it onto the output shaft.

← INSPECTION (from Jul 2007)COMPONENTS (from Jul 2007) →