REPAIR
Removal / installation · Vehicles built Jul 2007 – Jul 2009
Versions by build date: Jul 2007 – Jul 2009 from Aug 2009
| 1.
REPAIR VALVE SEAT |
 |
- NOTICE:
- Use a cutter to gradually smooth the intake valve seat.
If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.
- Intake side:
If the seating is too low on the valve face, use 60° and 45° cutters to correct the seat.
- Exhaust side:
If the seating is too low on the valve face, use 75° and 45° cutters to correct the seat.
- Lap the valve and valve seat with an abrasive compound by hand.
After lapping, clean the valve and valve seat.