HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built from Aug 2014
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 Aug 2012 – Jul 2014 from Aug 2014
- HINT:
- Use these procedures to troubleshoot the lighting system.
- *: Use the intelligent tester.
- Use these procedures to troubleshoot the lighting system.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK |
| |||||
| 3.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
| |||||
| 4.INSPECT COMMUNICATION FUNCTION OF LARGE-SCALE MULTIPLEX COMMUNICATION SYSTEM (BEAN)* |
Use the intelligent tester to check if the Multiplex Communication System (MPX) is functioning normally.
Result Result
Proceed to
MPX DTC is not output
A
MPX DTC is output
B
|
|||||
| |||||
| 5.PROBLEM SYMPTOMS TABLE |
| Result |
Proceed to |
| If fault is not listed in problem symptoms table |
A |
| If fault is listed in problem symptoms table |
B |
|
|||||
| |||||
| 6.OVERALL ANALYSIS AND TROUBLESHOOTING* |
Terminals of ECU (Click here)
DATA LIST / ACTIVE TEST (Click here)
| |||||
| 7.REPAIR OR REPLACE |
| |||||
| 8.CONFIRMATION TEST |
| |||||