2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

TERMINALS OF ECU

System information · Vehicles built Nov 2010 – Jul 2012

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 Aug 2012 – Jul 2014 from Aug 2014


CHECK MAIN BODY ECU (for LHD)
B136051E12
B136052E07
  1. Disconnect the 1A, 1B, 1E and 1H main body ECU connectors.

  2. Measure the voltages and resistances of the wire harness side connectors.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    1A-7 (GND2) - Body ground
    W - Body ground
    Ground
    Always
    Below 1 Ω
    1B-4 (BECU) - Body ground
    W-R - Body ground
    Power source circuit (from battery)
    Always
    11 to 14 V
    1E-9 (BDR1) - Body ground
    B-Y - Body ground
    Power source circuit (from battery)
    Always
    11 to 14 V
    1H-2 (GND1) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω

  3. Reconnect the main body ECU connectors.

  4. Measure the voltages of the wire harness side connectors.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    1A-8 (ILE) - Body ground
    W - Body ground
    Illumination signal (to room light assembly)
    Driver door closed
    11 to 14 V
    Driver door open
    Below 1 V
    1B-8 (HRLY) - Body ground
    Y-P - Body ground
    HEAD signal (to HEAD relay)
    Light control switch off or in TAIL
    11 to 14 V
    Light control switch in HEAD
    Below 1 V
    1B-9 (TRLY) - Body ground
    G - Body ground
    TAIL signal (to TAIL relay)
    Light control switch off
    11 to 14 V
    Light control switch in TAIL or HEAD
    Below 1 V
    1B-11 (TRLY) - Body ground
    G - Body ground
    TAIL signal (to TAIL relay)
    Light control switch off
    11 to 14 V
    Light control switch in TAIL or HEAD
    Below 1 V
    1D-5 (ACC) - Body ground
    W-G - Body ground
    Ignition switch ACC signal circuit (to ignition switch)
    Ignition switch off
    Below 1 V
    Ignition switch ACC
    11 to 14 V
    1F-8 (SIG) - Body ground
    B-R - Body ground
    Ignition switch signal
    Ignition switch off
    Below 1 V
    Ignition switch ON
    11 to 14 V
    1F-13 (TRLY) - Body ground
    G - Body ground
    TAIL signal (to TAIL relay)
    Light control switch off
    11 to 14 V
    Light control switch in TAIL or HEAD
    Below 1 V
    1K-9 (ILE) - Body ground
    R-W - Body ground
    Illumination signal (to room light assembly)
    Driver door closed
    11 to 14 V
    Driver door open
    Below 1 V
    1L-5 (TRLY) - Body ground
    G - Body ground
    TAIL signal (to TAIL relay)
    Light control switch off
    11 to 14 V
    Light control switch in TAIL or HEAD
    Below 1 V
    E7-7 (BCTY) - Body ground
    W - Body ground
    Back door courtesy switch input
    Back door open
    Below 1 V
    Back door closed
    9 to 14 V (or pulse generation)
    E7-11 (RLCY) - Body ground
    P-B - Body ground
    Rear LH door courtesy switch input
    Rear LH door open
    Below 1 V
    Rear LH door closed
    9 to 14 V (or pulse generation)
    E7-12 (RRCY) - Body ground
    P-L - Body ground
    Rear RH door courtesy switch input
    Rear RH door open
    Below 1 V
    Rear RH door closed
    9 to 14 V (or pulse generation)
    E7-23 (DCTY) - Body ground
    R-B - Body ground
    Driver door courtesy switch input
    Driver door open
    Below 1 V
    Driver door closed
    9 to 14 V (or pulse generation)
    E7-24 (PCTY) - Body ground
    R-B - Body ground
    Front passenger door courtesy switch input
    Front passenger door open
    Below 1 V
    Front passenger door closed
    9 to 14 V (or pulse generation)
    E8-1 (HEAD) - Body ground
    R - Body ground
    Light control switch (HEAD signal)
    Ignition switch ON, light control switch off
    11 to 14 V
    Ignition switch off, light control switch off
    9 to 14 V (or pulse generation)
    Light control switch ON
    Below 1 V
    E8-7 (HF) - Body ground
    R-W - Body ground
    Headlight dimmer switch (FLASH signal)
    Headlight dimmer switch in FLASH
    Below 1 V
    Headlight dimmer switch in LOW or HIGH
    11 to 14 V
    E8-8 (TAIL) - Body ground
    G - Body ground
    Light control switch (TAIL signal)
    Ignition switch ON, light control switch off
    11 to 14 V
    Ignition switch off, light control switch off
    9 to 14 V (or pulse generation)
    Light control switch in TAIL
    Below 1 V
    E8-20 (HF2) - Body ground
    Y-P - Body ground
    Headlight dimmer switch (FLASH signal)
    Headlight dimmer switch in FLASH
    Below 1 V
    Headlight dimmer switch in LOW or HIGH
    11 to 14 V


CHECK MAIN BODY ECU (for RHD)
B264337E01
B264338E01
  1. Disconnect the 1E, 1H and 1L main body ECU connectors.

  2. Measure the voltages and resistances of the wire harness side connectors.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    1E-9 (BDR1) - Body ground
    B - Body ground
    Power source circuit (from battery)
    Always
    11 to 14 V
    1H-2 (GND1) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    1H-2 (GND2) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    1L-4 (BECU) - Body ground
    W-R - Body ground
    Power source circuit (from battery)
    Always
    11 to 14 V

  3. Reconnect the main body ECU connectors.

  4. Measure the voltages of the wire harness side connectors.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    1B-8 (HRLY) - Body ground
    Y-G - Body ground
    HEAD signal (to HEAD relay)
    Light control switch off or in TAIL
    11 to 14 V
    Light control switch in HEAD
    Below 1 V
    1B-11 (TRLY) - Body ground
    G - Body ground
    TAIL signal (to TAIL relay)
    Light control switch off
    11 to 14 V
    Light control switch in TAIL or HEAD
    Below 1 V
    1D-5 (ACC) - Body ground
    W-G - Body ground
    Ignition switch ACC signal circuit (to ignition switch)
    Ignition switch off
    Below 1 V
    Ignition switch ACC
    11 to 14 V
    1J-28 (SIG) - Body ground
    B-R - Body ground
    Ignition switch signal
    Ignition switch off
    Below 1 V
    Ignition switch ON
    11 to 14 V
    1K-9 (ILE) - Body ground
    R-W - Body ground
    Illumination signal (to room light assembly)
    Driver door closed
    11 to 14 V
    Driver door open
    Below 1 V
    1L-5 (TRLY) - Body ground
    G - Body ground
    TAIL signal (to TAIL relay)
    Light control switch off
    11 to 14 V
    Light control switch in TAIL or HEAD
    Below 1 V
    E7-7 (BCTY) - Body ground
    W - Body ground
    Back door courtesy switch input
    Back door open
    Below 1 V
    Back door closed
    9 to 14 V (or pulse generation)
    E7-11 (RLCY) - Body ground
    P-B - Body ground
    Rear LH door courtesy switch input
    Rear LH door open
    Below 1 V
    Rear LH door closed
    9 to 14 V (or pulse generation)
    E7-12 (RRCY) - Body ground
    P-L - Body ground
    Rear RH door courtesy switch input
    Rear RH door open
    Below 1 V
    Rear RH door closed
    9 to 14 V (or pulse generation)
    E7-23 (DCTY) - Body ground
    R-B - Body ground
    Driver door courtesy switch input
    Driver door open
    Below 1 V
    Driver door closed
    9 to 14 V (or pulse generation)
    E7-24 (PCTY) - Body ground
    G - Body ground
    Front passenger door courtesy switch input
    Front passenger door open
    Below 1 V
    Front passenger door closed
    9 to 14 V (or pulse generation)
    E8-1 (HEAD) - Body ground
    R - Body ground
    Light control switch (HEAD signal)
    Ignition switch ON, light control switch off
    11 to 14 V
    Ignition switch off, light control switch off
    9 to 14 V (or pulse generation)
    Light control switch ON
    Below 1 V
    E8-7 (HF) - Body ground
    R-W - Body ground
    Headlight dimmer switch (FLASH signal)
    Headlight dimmer switch in FLASH
    Below 1 V
    Headlight dimmer switch in LOW or HIGH
    11 to 14 V
    E8-8 (TAIL) - Body ground
    G - Body ground
    Light control switch (TAIL signal)
    Ignition switch ON, light control switch off
    11 to 14 V
    Ignition switch off, light control switch off
    9 to 14 V (or pulse generation)
    Light control switch in TAIL
    Below 1 V
    E8-20 (HF2) - Body ground
    Y-P - Body ground
    Headlight dimmer switch (FLASH signal)
    Headlight dimmer switch in FLASH
    Below 1 V
    Headlight dimmer switch in LOW or HIGH
    11 to 14 V

← TERMINALS OF ECU (Jul 2007 – Oct 2010)TERMINALS OF ECU (Aug 2012 – Jul 2014) →