INSTALLATION
Removal / installation · Vehicles built from Jul 2007
| 1. INSTALL REAR ROOM LIGHT ASSEMBLY |
Install room light bulb No. 1.
Engage the 4 claws and install the room light switch base.

Install the roof wire into the claw of the room light.
Engage the 4 claws and install the room light.

Engage the 4 claws and install the 2 covers.

Engage the 4 claws and install the room light lens.

| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- Torque:
- 3.9 N*m{ 40 kgf*cm , 35 in.*lbf }
