INSPECTION
Inspection · Vehicles built from Jul 2007
| INSPECT REAR ROOM LIGHT ASSEMBLY |
![]() ![]() |
Check the resistance.
Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
-
OFF
10 kΩ or higher
CTY - B
DOOR
Below 1 Ω
B - E
ON
Below 1 Ω
Check the light operation.
Connect the positive (+) battery lead to terminal B and the negative (-) battery lead to terminal CTY, then check that the light illuminates when the switch is in the DOOR position.
- Standard:
- Light illuminates.
Connect the positive (+) battery lead to terminal B and the negative (-) battery lead to terminal E, then check that the light illuminates when the switch is in the ON position.
- Standard:
- Light illuminates.


