REMOVAL
Removal / installation · Vehicles built from Jul 2007
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE REAR ROOM LIGHT ASSEMBLY |
![]() ![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light lens.
Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the 2 covers.

Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws.

Disengage the roof wire from the claw of the room light.

Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light switch base.
Remove room light bulb No. 1.

