2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Aug 2014

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2014 from Aug 2014


INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for LHD)

  1. Check the resistance of the light control switch.

    1. E218750E05
      Measure the resistance according to the value(s) in the table below.
      Text in Illustration 
      *a
      Component without harness connected
      (Headlight Dimmer Switch Assembly)

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      14 (T) - 16 (EL)
      OFF
      10 kΩ or higher
      13 (H) - 16 (EL)
      OFF
      10 kΩ or higher
      14 (T) - 16 (EL)
      TAIL
      Below 1 Ω
      14 (T) - 16 (EL)
      HEAD
      Below 1 Ω
      13 (H) - 16 (EL)
      HEAD
      Below 1 Ω

      If the result is not as specified, replace the headlight dimmer switch assembly.

  1. Check the resistance of the headlight dimmer switch.

    1. E218750E07
      Measure the resistance according to the value(s) in the table below.
      Text in Illustration 
      *a
      Component without harness connected
      (Headlight Dimmer Switch Assembly)

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      8 (HF) - 16 (EL)
      FLASH
      Below 1 Ω
      7 (HU) - 16 (EL)
      FLASH
      Below 1 Ω
      16 (EL) - 17 (HL)
      LOW BEAM
      Below 1 Ω
      7 (HU) - 16 (EL)
      HI BEAM
      Below 1 Ω

      If the result is not as specified, replace the headlight dimmer switch assembly.

  1. Check the resistance of the turn signal switch.

    1. E218750E08
      Measure the resistance according to the value(s) in the table below.
      Text in Illustration 
      *a
      Component without harness connected
      (Headlight Dimmer Switch Assembly)

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      2 (TB) - 3 (TR)
      Right turn
      Below 1 Ω
      2 (TB) - 3 (TR)
      Neutral
      10 kΩ or higher
      1 (TL) - 2 (TB)
      Neutral
      10 kΩ or higher
      1 (TL) - 2 (TB)
      Left turn
      Below 1 Ω

      If the result is not as specified, replace the headlight dimmer switch assembly.

  1. Check the resistance of the fog light switch.

    1. E218750E09
      Measure the resistance according to the value(s) in the table below.
      Text in Illustration 
      *a
      Component without harness connected
      (Headlight Dimmer Switch Assembly)

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      11 (BFG) - 10 (LFG)
      ON
      Below 1 Ω
      11 (BFG) - 10 (LFG)
      OFF
      10 kΩ or higher

      If the result is not as specified, replace the headlight dimmer switch assembly.


INSPECT HEADLIGHT DIMMER SWITCH ASSEMBLY (for RHD)

  1. Check the resistance of the light control switch.

    1. E218750E06
      Measure the resistance according to the value(s) in the table below.
      Text in Illustration 
      *a
      Component without harness connected
      (Headlight Dimmer Switch Assembly)

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      9 (EL) - 14 (H)
      OFF
      10 kΩ or higher
      9 (EL) - 15 (T)
      OFF
      10 kΩ or higher
      9 (EL) - 15 (T)
      TAIL
      Below 1 Ω
      9 (EL) - 14 (H)
      HEAD
      Below 1 Ω
      9 (EL) - 15 (T)
      HEAD
      Below 1 Ω

      If the result is not as specified, replace the headlight dimmer switch assembly.

  1. Check the resistance of the headlight dimmer switch.

    1. E218750E10
      Measure the resistance according to the value(s) in the table below.
      Text in Illustration 
      *a
      Component without harness connected
      (Headlight Dimmer Switch Assembly)

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      1 (HF) - 9 (EL)
      FLASH
      Below 1 Ω
      2 (HU) - 9 (EL)
      FLASH
      Below 1 Ω
      9 (EL) - 10 (HL)
      LOW BEAM
      Below 1 Ω
      2 (HU) - 9 (EL)
      HI BEAM
      Below 1 Ω

      If the result is not as specified, replace the headlight dimmer switch assembly.

  1. Check the resistance of the turn signal switch.

    1. E218750E11
      Measure the resistance according to the value(s) in the table below.
      Text in Illustration 
      *a
      Component without harness connected
      (Headlight Dimmer Switch Assembly)

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      7 (TB) - 8 (TR)
      Right turn
      Below 1 Ω
      6 (TL) - 7 (TB)
      Neutral
      10 kΩ or higher
      7 (TB) - 8 (TR)
      Neutral
      10 kΩ or higher
      6 (TL) - 7 (TB)
      Left turn
      Below 1 Ω

      If the result is not as specified, replace the headlight dimmer switch assembly.

  1. Check the resistance of the fog light switch.

    1. E218750E12
      Measure the resistance according to the value(s) in the table below.
      Text in Illustration 
      *a
      Component without harness connected
      (Headlight Dimmer Switch Assembly)

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      12 (BFG) - 16 (LFG)
      ON
      Below 1 Ω
      12 (BFG) - 16 (LFG)
      OFF
      10 kΩ or higher

      If the result is not as specified, replace the headlight dimmer switch assembly.

← INSPECTION (Nov 2010 – Jul 2014)INSTALLATION (from Jul 2007) →