INSPECTION
Inspection · Vehicles built from Jul 2007
| INSPECT STOP LIGHT SWITCH |
Check the resistance.

Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
1 - 2
Switch pin released
Below 1 Ω
3 - 4
Switch pin released
10 kΩ or higher
1 - 2
Switch pin pushed in
10 kΩ or higher
3 - 4
Switch pin pushed in
Below 1 Ω
