2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Aug 2009

Versions by build date: Jul 2007 – Jul 2009 from Aug 2009


1. INSTALL FRONT WASHER MOTOR AND PUMP ASSEMBLY
  1. Install the windshield washer motor and pump onto the packing of the washer jar.


2. INSTALL REAR WASHER MOTOR AND PUMP ASSEMBLY (w/ Rear Wiper)
  1. Install the windshield washer motor and pump onto the packing of the washer jar.


3. INSTALL WINDSHIELD WASHER JAR ASSEMBLY
  1. Install the windshield washer jar with the 3 bolts.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }

  1. Connect the connector.


4. INSTALL WASHER INLET SUB-ASSEMBLY
  1. Engage the claw and install the washer inlet.

  1. Install the washer jar inlet filter.


5. INSTALL FRONT FENDER LINER RH
  1. Install the front fender liner RH with the clip and the 4 grommets.

  1. Install the 2 bolts and the 6 screws.


6. FILL UP WASHER JAR AND PUMP ASSEMBLY WITH WASHER FLUID
  1. Fill the washer jar with washer fluid.

← INSTALLATION (Jul 2007 – Jul 2009)ON-VEHICLE INSPECTION (from Jul 2007) →