2011-2016 FJ Cruiser · Service Manual BRAKE

DATA LIST / ACTIVE TEST

System information · Vehicles built Jul 2007 – Oct 2010

Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2012 from Aug 2012


DATA LIST

HINT:
By referring to the Data List displayed on the intelligent tester, the value and status of parts such as switches, sensors and actuator can be read without removing any parts. Reading the Data List as the first step of troubleshooting is one method of shortening diagnostic time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the tester on.

  4. Select the following menu items: Chassis / ABS/VSC/TRC / Data List

    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    H/B Motor Relay
    HB motor relay : ON or OFF
    ON : Motor relay ON
    OFF : Motor relay OFF
    -
    Solenoid Relay
    Solenoid relay : ON or OFF
    ON : Solenoid relay ON
    OFF : Solenoid relay OFF
    -
    VSC/TRC OFF SW*
    VSC OFF switch / ON or OFF
    ON: VSC OFF switch ON
    OFF: VSC OFF switch OFF
    -
    Main Idle SW
    Main idle switch : ON or OFF
    ON : Accelerator pedal released
    OFF : Accelerator pedal depressed
    -
    Stop Light SW
    Stop light switch : ON or OFF
    ON : Brake pedal depressed
    OFF : Brake pedal released
    -
    Parking Brake SW
    Parking brake switch : ON or OFF
    ON : Parking brake applied
    OFF : Parking brake released
    -
    Reservoir Warning SW
    Reservoir level warning switch : ON or OFF
    ON : Switch ON
    OFF : Switch OFF
    -
    FR Wheel ABS Control
    ABS operation (FR) : Before or Operate
    Before : No ABS operation (FR)
    Operate : During ABS operation (FR)
    -
    FL Wheel ABS Control
    ABS operation (FL) : Before or Operate
    Before : No ABS operation (FL)
    Operate : During ABS operation (FL))
    -
    RR Wheel ABS Control
    ABS operation (RR) : Before or Operate
    Before : No ABS operation (RR)
    Operate : During ABS operation (RR)
    -
    RL Wheel ABS Control
    ABS operation (RL) : Before or Operate
    Before : No ABS operation (RL)
    Operate : During ABS operation (RL)
    -
    FR Wheel Speed
    Wheel speed sensor (FR) reading : min.: 0 km/h (0 MPH), max.: 326 km/h (202 MPH)
    Actual wheel speed
    Similar to speed indicated on speedometer
    FL Wheel Speed
    Wheel speed sensor (FL) reading : min.: 0 km/h (0 MPH), max.: 326 km/h (202 MPH)
    Actual wheel speed
    Similar to speed indicated on speedometer
    RR Wheel Speed
    Wheel speed sensor (RR) reading : min.: 0 km/h (0 MPH), max.: 326 km/h (202 MPH)
    Actual wheel speed
    Similar to speed indicated on speedometer
    RL Wheel Speed
    Wheel speed sensor (RL) reading : min.: 0 km/h (0 MPH), max.: 326 km/h (202 MPH)
    Actual wheel speed
    Similar to speed indicated on speedometer
    Deceleration Sensor1
    Deceleration sensor 1 reading : min.: -1.869 G, max.: 1.869 G
    Approximately 0 +- 0.13G in still condition
    Reading changes when vehicle bounced
    Deceleration Sensor2
    Deceleration sensor 2 reading : min.: -1.869 G, max.: 1.869 G
    Approximately 0 +- 0.13G in still condition
    Reading changes when vehicle bounced
    ECU IG Power Voltage
    ECU power supply voltage : TOO LOW : NORMAL : TOO HIGH
    TOO HIGH: 14 V or more
    NORMAL: 9.5 V or 14V
    TOO LOW: Below 9.5 V
    -
    Solenoid (SFRR)
    ABS solenoid (SFRR) : ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    Solenoid (SFRH)
    ABS solenoid (SFRH) : ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    Solenoid (SFLR)
    ABS solenoid (SFLR) : ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    Solenoid (SFLH)
    ABS solenoid (SFLH) : ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    Solenoid (SRRR)
    ABS solenoid (SRRR [SRR]) : ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    Solenoid (SRRH)
    ABS solenoid (SRRH [SRH]) : ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    Solenoid (SRLR)
    ABS solenoid (SRLR) : ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    Solenoid (SRLH)
    ABS solenoid (SRLH) : ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    Solenoid (SRCF)
    TRAC solenoid (SRCF [SMCF]) : ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    Solenoid (SRCR)
    TRAC solenoid (SRCR [SREA]) : ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    Solenoid (SRMF)
    TRAC solenoid (SRMF [SREC]) : ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    Solenoid (SRMR)
    TRAC solenoid (SRMR [SMCR, STR]) : ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    Engine Speed
    Engine speed:
    min.: 0 rpm, max.: 6000 rpm
    Actual engine speed
    -
    Vehicle Speed
    Maximum wheel speed sensor reading : min.: 0 km/h (0 MPH), max.: 326 km/h (202 MPH)
    Actual vehicle speed
    Speed indicated on speedometer
    Yaw Rate Sensor
    Yaw rate sensor:
    min.: -128 deg/s, max.: 127 deg/s
    min.: -128 deg/s
    max.: 127 deg/s
    -
    Zero Yaw Rate Sensor
    Memorized zero value:
    min.: -128 deg/s, max.: 127 deg/s
    min.: -128 deg/s
    max.: 127 deg/s
    -
    Steering Angle Sensor
    Steering sensor:
    min.: -1152 deg, max.: 1150.875 deg
    Left turn: Increase
    Right turn: Decrease
    -
    Master Cylinder Sensor1
    Master cylinder pressure sensor 1 reading : min.: 0 V, max.: 5 V
    When brake pedal released : 0.3 V to 0.9 V
    Reading increases when brake pedal depressed
    FR Wheel Direction
    Front right wheel direction
    Back: Wheel direction back
    Forward: Wheel direction forward
    -
    FL Wheel Direction
    Front left wheel direction
    Back: Wheel direction back
    Forward: Wheel direction forward
    -
    RR Wheel Direction
    Rear right wheel direction
    Back: Wheel direction back
    Forward: Wheel direction forward
    -
    RL Wheel Direction
    Rear left wheel direction
    Back: Wheel direction back
    Forward: Wheel direction forward
    -
    FR Speed Open
    FR speed sensor open detection :
    OPN_DET or NORMAL
    OPN_DET: Momentary interruption
    NORMAL: Normal
    -
    FL Speed Open
    FL speed sensor open detection :
    OPN_DET or NORMAL
    OPN_DET: Momentary interruption
    NORMAL: Normal
    -
    RR Speed Open
    RR speed sensor open detection :
    OPN_DET or NORMAL
    OPN_DET: Momentary interruption
    NORMAL: Normal
    -
    RL Speed Open
    RL speed sensor open detection :
    OPN_DET or NORMAL
    OPN_DET: Momentary interruption
    NORMAL: Normal
    -
    EFI Open
    EFI communication open detection :
    OPN_DET or NORMAL
    OPN_DET: Momentary interruption
    NORMAL: Normal
    -
    Yaw Rate Open
    Yaw rate sensor open detection :
    OPN_DET or NORMAL
    OPN_DET: Momentary interruption
    NORMAL: Normal
    -
    Deceleration Open
    Deceleration sensor open detection :
    OPN_DET or NORMAL
    OPN_DET: Momentary interruption
    NORMAL: Normal
    -
    Steering Open
    Steering angle sensor open detection :
    OPN_DET or NORMAL
    OPN_DET: Momentary interruption
    NORMAL: Normal
    -
    Accumulator Open
    Accumulator pressure sensor open detection :
    OPN_DET or NORMAL
    OPN_DET: Momentary interruption
    NORMAL: Normal
    -
    Accelerator %
    Different % of present accelerator
    min.: 0
    max.: 128
    -
    Real output torque
    Real output torque
    min.: -1024
    max.: 1016
    -
    Test Mode
    Test mode : Normal or TEST
    Normal L: Normal mode
    TEST: During test mode
    -
    Master Cylinder Sensor1
    Master cylinder pressure sensor 1 reading : min.: 0V, max.: 5V
    When brake pedal released: 0.3 to 0.9V
    Reading increases when brake pedal depressed
    Accumulator Sensor
    Accumulator pressure sensor reading : min.: 0 V, max.: 5 V
    min.: 3 V
    max.: 5 V
    If value constant regardless of pump operation, accumulator pressure sensor malfunction suspected.
    Number of DTC
    Number of DTC recorded : min.: 0, max.: 255
    min.: 0
    max.: 255
    -
    *: w/ VSC OFF Switch


ACTIVE TEST

HINT:
Performing the Active Test using the intelligent tester allows relays and actuators to be operated without removing any parts. Performing the Active Test as the first step of troubleshooting is one method of shortening diagnostic time.
It is possible to display the Data List during the Active Test.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the tester on.

  4. Select the following menu items: Chassis / ABS/VSC/TRC/ Active Test

  5. By following the prompts on the tester, perform the Active Test.

    HINT:
    1. The ignition switch must be turned to ON to proceed to the Active Test using the intelligent tester.
    2. The motors stop automatically after 5 seconds of activation to prevent them from being damaged. When repeatedly activated, certain intervals are required.
    3. Each solenoid stops automatically after 2 seconds of activation to prevent them from being damaged, and can be operated again after a certain interval.
    4. Do not depress the brake pedal while only the pressure reduction solenoid valves are on.
    5. Do not drive 2 or more solenoids simultaneously except to operate the pressure holding solenoid valves and pressure reduction solenoid valves of each wheel.

Tester Display
Test Part
Control Range
Diagnostic Note
ABS Solenoid (SFRR)
ABS solenoid (SFRR)
ABS solenoid (SFRR) ON or OFF
Operation of solenoid (clicking sound) can be heard
ABS Solenoid (SFRH)
ABS solenoid (SFRH)
ABS solenoid (SFRH) ON or OFF
Operation of solenoid (clicking sound) can be heard
ABS Solenoid (SFLR)
ABS solenoid (SFLR)
ABS solenoid (SFLR) ON or OFF
Operation of solenoid (clicking sound) can be heard
ABS Solenoid (SFLH)
ABS solenoid (SFLH)
ABS solenoid (SFLH) ON or OFF
Operation of solenoid (clicking sound) can be heard
ABS Solenoid (SRRR)
ABS solenoid (SRRR)
ABS solenoid (SRRR) ON or OFF
Operation of solenoid (clicking sound) can be heard
ABS Solenoid (SRRH)
ABS solenoid (SRRH)
ABS solenoid (SRRH) ON or OFF
Operation of solenoid (clicking sound) can be heard
ABS Solenoid (SRLR)
ABS solenoid (SRLR)
ABS solenoid (SRLR) ON or OFF
Operation of solenoid (clicking sound) can be heard
ABS Solenoid (SRLH)
ABS solenoid (SFLH)
ABS solenoid (SFLH) ON or OFF
Operation of solenoid (clicking sound) can be heard
TRC Solenoid (SRCF)
TRC solenoid SRCF (SMCF)
TRC solenoid SRCF (SMCF) ON or OFF
Operation of solenoid (clicking sound) can be heard
TRC Solenoid (SRCR)
TRC solenoid SRCR (SREA)
TRC solenoid SRCR (SREA) ON or OFF
Operation of solenoid (clicking sound) can be heard
TRC Solenoid (SRMF)
TRC solenoid SRMF (SREC)
TRC solenoid SRMF (SREC) ON or OFF
Operation of solenoid (clicking sound) can be heard
TRC Solenoid (SRMR)
TRC solenoid SRMR (STR)
TRC solenoid SRMR (STR) ON or OFF
Operation of solenoid (clicking sound) can be heard
Solenoid Relay
ABS solenoid relay
ABS solenoid relay ON or OFF
Operation of solenoid (clicking sound) can be heard
ABS Motor Relay
ABS motor relay
ABS motor relay ON or OFF
Operation of motor can be heard
ABS Warning Light
ABS warning light
ABS warning light ON or OFF
Observe combination meter
VSC/TRC OFF Indicator Light
VSC OFF indicator
VSC OFF indicator ON or OFF
Observe combination meter
Slip Indicator Light
SLIP indicator light
SLIP indicator light ON or OFF
Observe combination meter
Brake Warning Light
BRAKE warning light
BRAKE warning light ON or OFF
Observe combination meter
VSC H/B Warning Buzzer
Skid control buzzer
Skid control buzzer ON or OFF
Buzzer can be heard
Stop Light Relay
Stop light relay
Stop light relay ON or OFF
Observe stop light
← FAIL-SAFE CHART (from Aug 2012)DATA LIST / ACTIVE TEST (Nov 2010 – Jul 2012) →