2011-2016 FJ Cruiser · Service Manual BRAKE

C1203/53 ECM Communication Circuit Malfunction

Diagnostic trouble codes · Vehicles built Aug 2009 – Oct 2010

Versions by build date: Jul 2007 – Jul 2009 Aug 2009 – Oct 2010

DESCRIPTION

The circuit sends TRC, A-TRAC and VSC control information from the skid control ECU to the ECM, and engine control information from the ECM to the skid control ECU via the CAN communication system.
DTC No.
DTC Detecting Condition
Trouble Areas
C1203/53
Information relating to engine drive source or destination stored in ECM does not match that stored in skid control ECU.
  1. CAN communication system
  2. ECM

INSPECTION PROCEDURE


1. CHECK DTC (CAN COMMUNICATION SYSTEM)
  1. Check if any DTC is recorded for the CAN communication system (Click here).

    Result:
    Result
    Proceed to
    DTC not output
    A
    DTC output
    B



B
REPAIR CAN COMMUNICATION SYSTEM (Click here)
A


2. CHECK DTC (ENGINE CONTROL SYSTEM)
  1. Check if any DTC is recorded for the engine control system (Click here).

    Result:
    Result
    Proceed to
    DTC output
    A
    DTC not output
    B



B
REPLACE ECM (Click here)
A

REPAIR ENGINE CONTROL SYSTEM


← C1203/53 ECM Communication Circuit Malfunction (Jul 2007 – Jul 2009)C120A ECU Initial Setting Incomplete (Nov 2010 – Jul 2012) →