43 ABS Control System Malfunction
Diagnostic trouble codes · Vehicles built Nov 2010 – Jul 2011
Versions by build date: Jul 2007 – Oct 2010 Nov 2010 – Jul 2011 Aug 2011 – Jul 2012 from Aug 2012
DESCRIPTION
This DTC is output when the VSC system detects a malfunction in the ABS system. When DTC 43 is stored, there is no malfunction in the skid control ECU.| DTC Code |
DTC Detection Condition |
Trouble Area |
| 43 |
ABS control system abnormal |
ABS control system |
- NOTICE:
- When replacing the master cylinder solenoid, perform calibration (Click here).
INSPECTION PROCEDURE
| 1. CHECK ANTI-LOCK BRAKE SYSTEM |
Clear the DTCs (Click here).
Turn the ignition switch off.
Turn the ignition switch to ON.
Check if an ABS DTC is output (Click here).
Result Result
Proceed to
DTC (ABS DTC) is not output
A
DTC (ABS DTC) is output
B
|
|
||||
| A | |
| 2. CONFIRM DTC |
Clear the DTCs (Click here).
Turn the ignition switch off.
Turn the ignition switch to ON.
Check if the same DTC is output (Click here).
Result Result
Proceed to
DTC is not output
A
DTC is output
B
|
|
||||
| A | ||
| ||
