2011-2016 FJ Cruiser · Service Manual BODY

ADJUSTMENT

Removal / installation · Vehicles built from Jul 2007

B104980E01

HINT:
  1. Centering bolts are used to mount the door hinge onto the vehicle body and door. The door cannot be adjusted with the centering bolts on. Substitute standard bolts (with washers) for the centering bolts when making adjustments.
  2. For bolts without torque specifications, check the standard bolt chart (Click here).


1. INSPECT BACK DOOR

  1. Check that the clearance measurements are within the standard ranges.

    B139380E01

    Standard:
    Area
    Measurement
    Area
    Measurement
    A
    8.5 to 11.5 mm
    (0.335 to 0.453 in.)
    G
    5 to 8 mm
    (0.197 to 0.315 in.)
    B
    0 to 3 mm
    (0 to 0.118 in.)
    H
    3.5 to 6.5 mm
    (0.138 to 0.256 in.)
    C
    5.5 to 8.5 mm
    (0.217 to 0.335 in.)
    I
    2.8 to 5.8 mm
    (0.110 to 0.228 in.)
    D
    5 to 8 mm
    (0.197 to 0.315 in.)
    J
    5.5 to 8.5 mm
    (0.217 to 0.335 in.)
    E
    13.5 to 16.5 mm
    (0.531 to 0.650 in.)
    K
    0 to 3 mm
    (0 to 0.118 in.)
    F
    -0.9 to 2.1 mm
    (-0.035 to 0.0827in.)
    -
    -


2. ADJUST BACK DOOR

  1. B136002
    Adjust the door position.

    1. Adjust the door horizontally and longitudinally by loosening the 4 door side hinge bolts.

    2. Tighten the door side hinge bolts after the adjustment.

      Torque:
      26 N*m{ 265 kgf*cm , 19 ft.*lbf }

    3. B136003
      Horizontally and vertically adjust the door by loosening the 8 body side hinge bolts.

    4. Tighten the body side hinge bolts after the adjustment.

      Torque:
      42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. B136000
    Adjust the striker position.

    1. Adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a plastic hammer.

    2. Tighten the striker mounting screws after the adjustment.

      Torque:
      23 N*m{ 235 kgf*cm , 17 ft.*lbf }

  1. B136001
    Adjust the back door side female stopper.

    1. Adjust the side female stopper so that the door can be opened/closed smoothly, as shown in the illustration.

    2. Tighten the side female stopper bolts after the adjustment.

      Torque:
      7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

← DISASSEMBLY (from Aug 2008)REASSEMBLY (Jul 2007 – Jul 2008) →