2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSPECTION

Inspection · Vehicles built from Jul 2007


INSPECT UNLOCK WARNING SWITCH

B135516E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance and check the results in accordance with the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Pin released
      10 kΩ or higher
      1 - 2
      Pin pushed in
      Below 1 Ω

      If the result is not as specified, replace the unlock warning switch.

← REMOVAL (from Aug 2012)INSTALLATION (Jul 2007 – Oct 2010) →