2011-2016 FJ Cruiser · Service Manual DRIVE LINE

INSTALLATION

Removal / installation · Vehicles built from Jul 2007


1. INSTALL SPEEDOMETER DRIVEN GEAR SUB-ASSEMBLY

C113234
  1. Install a new O-ring onto the driven gear.

  1. C113235
    Install the driven gear onto the sensor with the clip.


2. INSTALL VEHICLE SPEED SENSOR WITH SPEEDOMETER DRIVEN GEAR SUB-ASSEMBLY

G022561
  1. Install the sensor with driven gear with the bolt.

    Torque:
    12 N*m{ 122 kgf*cm , 9 ft.*lbf }

  1. Connect the sensor connector.


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }

← REMOVAL (from Jul 2007)COMPONENTS (from Jul 2007) →