2011-2016 FJ Cruiser · Service Manual DRIVE LINE

REMOVAL

Removal / installation · Vehicles built from Jul 2007


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.


2. REMOVE VEHICLE SPEED SENSOR WITH SPEEDOMETER DRIVEN GEAR SUB-ASSEMBLY

G022561
  1. Disconnect the sensor connector.

  1. Remove the bolt and sensor with driven gear.


3. REMOVE SPEEDOMETER DRIVEN GEAR SUB-ASSEMBLY

C113235
  1. Remove the clip and driven gear from the sensor.

  1. C113234
    Remove the O-ring from the driven gear.

← COMPONENTS (from Jul 2007)INSTALLATION (from Jul 2007) →