2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

INSTALLATION

Removal / installation · Vehicles built from Nov 2010

Versions by build date: Jul 2007 – Oct 2010 from Nov 2010


1. INSTALL POWER OUTLET SOCKET COVER NO.2 (for LHD)

  1. E127826
    Engage the 2 claws and install a new power outlet socket cover.


2. INSTALL POWER OUTLET SOCKET COVER NO.2 (for RHD)

E218448
Engage the 2 claws and install a new power outlet socket cover.

3. INSTALL POWER OUTLET SOCKET (for LHD)

  1. E127827
    Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and install the power outlet socket.

  1. Securely engage the claw.


4. INSTALL POWER OUTLET SOCKET (for RHD)

  1. E218449
    Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and install the power outlet socket.

  1. E218452
    Turn the power outlet socket clockwise and securely engage the claw.


5. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY
  1. Engage the 3 clips and 2 claws and install the instrument lower cover.

  1. Install the 2 <E> bolts and 2 clips.


6. INSTALL CONSOLE UPPER PANEL NO. 1 GARNISH (for RHD)

  1. B267085
    Slide the console upper panel garnish toward the front of the vehicle and engage guide.

  1. Engage the claw and 2 clips and install the console upper panel garnish.


7. INSTALL FRONT CONSOLE BOX
  1. Engage the 5 guides and install the front console box.

  1. Install the 4 <H> bolts.


8. INSTALL BOX BOTTOM MAT
  1. Install the box bottom mat.


9. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
  1. Engage the 3 guides and 5 clips and install the console upper rear panel.


10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)

  1. B133896
    Install the shift lever knob.


11. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)

  1. B133894
    Install the shift lever knob.


12. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY

  1. B271483
    Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 guides.

  1. Engage the 4 claws and install the parking brake hole cover.

← INSTALLATION (Jul 2007 – Oct 2010)COMPONENTS (from Aug 2011) →