INSTALLATION
Removal / installation · Vehicles built Jul 2007 – Oct 2010
Versions by build date: Jul 2007 – Oct 2010 from Nov 2010
| 1.
INSTALL POWER OUTLET SOCKET COVER NO.2 |
 |
- Engage the 2 claws and install a new power outlet socket cover.
| 2.
INSTALL POWER OUTLET SOCKET |
 |
- Align the protrusion of the power outlet socket with the cutout of the power outlet socket cover and install the power outlet socket.
Securely engage the claw.
| 3.
INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY
|
 |
- Engage the 3 clips and 2 claws and install the instrument lower cover.
Install the 2 <F> bolts and 2 clips.
| 4.
INSTALL CONSOLE BOX ASSEMBLY REAR
|
 |
- Engage the 5 claws and install the front console box.
Install the 4 <D> screws.
| 5.
INSTALL BOX BOTTOM MAT
|
 |
- Install the box bottom mat.
| 6.
INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
|
 |
- Engage the 3 claws and 5 clips and install the console upper rear panel.
| 7.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)
|
 |
- Install the shift lever knob.
| 8.
INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)
|
 |
- Install the shift lever knob.
| 9.
INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY
|
 |
Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 C claws.
Engage the 4 claws and install the parking brake hole cover.
| 10.
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
 |
-
Torque:
- 3.9 N*m{
40 kgf*cm
, 35 in.*lbf
}