2011-2016 FJ Cruiser · Service Manual BODY ELECTRICAL

DTC CHECK / CLEAR

Troubleshooting · Vehicles built Nov 2010 – Jul 2011

Versions by build date: Nov 2010 – Jul 2011 Aug 2011 – Oct 2012 from Nov 2012


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Combination Meter / DTC.

  5. Check DTCs and then write them down.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

  6. Confirm the details of the DTCs (Click here).


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON (do not start the engine).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Combination Meter / DTC / Clear.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

  5. Clear DTCs by pressing the YES button on the tester.

    HINT:
    Refer to the intelligent tester operator's manual for further details.

← DIAGNOSIS SYSTEM (from Nov 2010)DTC CHECK / CLEAR (Aug 2011 – Oct 2012) →