DTC CHECK / CLEAR
Troubleshooting · Vehicles built from Nov 2012
Versions by build date: Nov 2010 – Jul 2011 Aug 2011 – Oct 2012 from Nov 2012
| CHECK DTC |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Body / Combination Meter / DTC.
Check DTCs and then write them down.
- HINT:
- Refer to the intelligent tester operator's manual for further details.
Confirm the details of the DTCs (Click here).
| CLEAR DTC |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON (do not start the engine).
Turn the intelligent tester on.
Enter the following menus: Body / Combination Meter / DTC / Clear.
- HINT:
- Refer to the intelligent tester operator's manual for further details.
Clear DTCs by pressing the YES button on the tester.
- HINT:
- Refer to the intelligent tester operator's manual for further details.