2011-2016 FJ Cruiser · Service Manual CRUISE CONTROL SYSTEM

INSPECTION

Inspection · Vehicles built from Jul 2007


INSPECT CRUISE CONTROL MAIN SWITCH

E129560E02
  1. Measure the resistance and check the results in accordance with the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1(ECC) - 3(CCS)
    Neutral
    10 kΩ or higher
    1(ECC) - 3(CCS)
    +/RES
    216 to 264 Ω
    1(ECC) - 3(CCS)
    -/SET
    567 to 693 Ω
    1(ECC) - 3(CCS)
    CANCEL
    1,386 to 1,694 Ω
    1(ECC) - 3(CCS)
    Main Switch off
    10 kΩ or higher
    1(ECC) - 3(CCS)
    Main Switch on
    Below 1 Ω

    If the result is not as specified, replace the cruise control main switch.

← REMOVAL (from Aug 2012)INSTALLATION (Jul 2007 – Oct 2010) →